Shop
Showing 921–940 of 1277 results
-
ACCESSORIES, Cables And Connectors, Proaudio, Samson Technologies
Samson PM6 Phantom Power Adapter
SKU: PM6
For connecting a headset microphone or Lavaliere microphone with mini XLR3 plug to a microphone preamp or mixer with large XLR connector with phantom power.
For example with the samson microphone like the LM5, LM10 or SE10 microphones.
SKU: PM6 -
Proaudio
Samson Powerbrite PB10 Pro Power Conditioner and Distribution Unit
SKU: SAPBPRO10
The Samson POWERBRITE PB10 is a 19 inch rackmount power conditioner that makes the perfect addition to any rack case. The PB 10 is loaded with 9 IEC outlets (8 rear and 1 front panel). The PB10 features a 10-amp circuit breaker, surge protection, peak voltage clamping and RFI/EMI filtering to provide clean, uninterrupted power. The front panel houses 2 LED lamps with dimmer control for rack illumination. The Powerbrite PB 10 also has a gooseneck lamp included for lighting the rear of your rack case.
Key Features:
- Protect your gear and organise your power distribution
- 19 inch rackmount power conditioner
- Dual digital voltage displays
- Front mounted dimmable led lamps
SKU: SAPBPRO10 -
ACCESSORIES, Filters And Screens, Popfilter, Proaudio, Samson Technologies
Samson PS01 – Microphone Pop Filter
ACCESSORIES, Filters And Screens, Popfilter, Proaudio, Samson TechnologiesSamson PS01 – Microphone Pop Filter
SKU: SAPS01
Key Features:
- 5.25″ microphone pop filter
- Dual-layer 4.75″ nylon mesh screen reduces vocal popping (“P-Pops”) and sibilance
- Durable 12″ gooseneck for optimal filter positioning
SKU: PS-01 -
ACCESSORIES, Filters And Screens, Popfilter, Proaudio, Samson Technologies
Samson PS04 – Microphone Pop Filter
ACCESSORIES, Filters And Screens, Popfilter, Proaudio, Samson TechnologiesSamson PS04 – Microphone Pop Filter
SKU: SAPS04
The Samson PS04 Microphone Pop Filter is an essential mic accessory for any studio or other vocal recording environment.
Key Feature
- 5.25″ microphone pop filter
- Dual-layer 4.75″ nylon mesh screen reduces vocal popping (“P-Pops”) and sibilance
- Durable 8″ gooseneck for optimal filter positioning
- C-clamp mount (1″ maximum grip) fits most standard mic stand shafts and booms
SKU: PS-04 -
ACCESSORIES, Filters And Screens, Popfilter, Proaudio, Samson Technologies
Samson PS05 Microphone Pop Filter (5.25″)
ACCESSORIES, Filters And Screens, Popfilter, Proaudio, Samson TechnologiesSamson PS05 Microphone Pop Filter (5.25″)
SKU: SAPS05
Key Features
- Reduces Vocal Popping Sounds
- Dual-Layer 4.75″ Nylon Mesh Screen
- 7.25″ Gooseneck
- Attaches to Boom via Built-In C-Clamp
- Ball-Joint Mount for 360° Rotation
SKU: PS-05 -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies, USB Microphones
Samson Q2U USB/XLR Dynamic Microphone
Dynamic Microphones, Microphones, Proaudio, Samson Technologies, USB MicrophonesSamson Q2U USB/XLR Dynamic Microphone
If you need one mic to handle anything from lead vocals on the stage to podcast recording without the cumbersome audio interface, the Samson Q2U will come in handy, doing so in an all-inclusive package at a cost-effective price.
Key Features
- For Live Sound & Digital Recording
- For Podcasting or Gigging
- Works with Analog Devices & over USB
- 3.5mm Headphone Output
- Cardioid Polar Pattern Rejects Room Tone
- Easy-to-Use Operation
- Broadcast-Quality 48 kHz/16-Bit Audio
- Requires No Power to Run Live
- Bus-Powered when Used with USB
- Stand, Clip, Windscreen & Cables
SKU: SAQ2U -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson Q4 – Dynamic Microphone
The Q4 Dynamic Microphone with On/Off Switch from Samson features a supercardioid pickup pattern with excellent off-axis rejection. It can be used to capture audio for live sound and studio applications such as miking vocals, presentations, instruments, and more.
Key Features
- For Live Sound, Vocals & Recording
- Neodymium Mic Element
- High Output, Low-Impedance Design
- 50 Hz to 15 kHz Frequency Response
- Gold-Plated XLR Connector
- Steel Grill
- Die-Cast Body
- Includes Mic Clip and 18′ XLR Cable
- Carry Case
SKU: Q4CL -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson Q6 Dynamic Handheld Mic with On/Off Switch
Dynamic Microphones, Microphones, Proaudio, Samson TechnologiesSamson Q6 Dynamic Handheld Mic with On/Off Switch
The Q6 Dynamic Handheld Microphone with On/Off Switch from Samson features a supercardioid pickup pattern with excellent off-axis rejection and a 80 Hz to 15 kHz frequency response. It can be used to capture audio for live sound and studio applications such as miking vocals, guitar cabinets, drums, and more.
Key Features
- For Live and Studio Applications
- Supercardioid Polar Pattern
- Neodymium Dynamic Mic Element
- High-Output, Low-Impedance Design
- 80 Hz to 15 kHz Frequency Response
- Shock-Mounted Capsule
- On/Off Switch for On-Stage Control
- Gold-Plated XLR Connector
- Rugged, Die-Cast Body and Steel Grill
- Includes Cable, Mic Clip, and Carry Case
SKU: SAQ6 -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson Q7 – Professional Dynamic Vocal Microphone
Dynamic Microphones, Microphones, Proaudio, Samson TechnologiesSamson Q7 – Professional Dynamic Vocal Microphone
Designed primarily for vocal applications, the Samson Q7x is a dynamic, handheld microphone. Its supercardioid polar pattern makes it quite suitable for the stage, as it tends to only pick up sound directly in front of the capsule.
Key Features
- Designed for Vocal Performance
- Supercardioid for Feedback Suppression
- 80 Hz to 12 kHz Frequency Response
- Midrange Lift & Low-End Roll Off
SKU: SAQ7X -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson Q8x – Professional Dynamic Vocal Microphone
Dynamic Microphones, Microphones, Proaudio, Samson TechnologiesSamson Q8x – Professional Dynamic Vocal Microphone
Designed primarily for vocal applications—but with a high enough SPL to handle snare drums, guitar cabs, and more—the Samson Q8x is a dynamic, handheld microphone sporting a neodymium mic element. Its supercardioid polar pattern makes it quite suitable for the stage, as it tends to only pick up sound directly in front of the capsule
Key Features
- Designed for Vocal Performance
- Supercardioid for Feedback Suppression
- 50 Hz to 16 kHz Frequency Response
- Slight Bump at 8 kHz for Presence
- SPL of 150 dB for High-Output Sources
- Capsule Encased in Pneumatic Shockmount
- Rugged Die-Cast Zinc-Alloy Casing
- Steel Grille on Capsule
- Gold-Plated XLR Connectors
- Included Mic Clip & Zipper Pouch
SKU: SAQ8x -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies, USB Microphones
Samson Q9U XLR/USB Dynamic Broadcast Microphone
Dynamic Microphones, Microphones, Proaudio, Samson Technologies, USB MicrophonesSamson Q9U XLR/USB Dynamic Broadcast Microphone
If you’re a podcaster looking for professional end-address microphone that will work with both USB and traditional analog setups, look no farther than the Samson Q9U, a microphone with USB-C and XLR outputs to bolster its versatility. Use this mic for your own solo podcasts, and take it with you whenever you’re doing an interview or a panel.
Key Features
- For Podcasting & Live Streaming
- USB-C for Computers, XLR for Analog
- Built-In Pop Filter & Shockmount
- 3.5mm Headphone Jack for Monitoring
- Cardioid Pattern Minimizes Room Tone
- Built-In Tone & Mute Controls
- Professional-Grade 96 kHz / 24-Bit Audio
- Bus-Power
SKU: Q9U -
Lavalier Microphone, Microphones, Proaudio, Samson Technologies
Samson QL5 – Condenser Lavalier Microphone
Lavalier Microphone, Microphones, Proaudio, Samson TechnologiesSamson QL5 – Condenser Lavalier Microphone
- Great for presentation and video applications
- Fixed charged condenser element
- Enhanced cardioid pickup pattern
- Sturdy tie clip securely attaches microphone out of sight
- Carry Pouch and PM5 XLR adapter included
SKU: QL5 -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson R21S Dynamic Microphone
The Samson R21S Handheld Microphone is ideal for speech and vocal capturing during performances, public speech or recording.
Key Features
- Ideal for vocals and presentations
- Shock mounted mic element
- Cardioid pickup pattern
- High gain output, low impedance design
- 80Hz–12kHz frequency response
- On/Off switch
- XLR to 1/4″ mic cable
- Mic clip included
SKU: R21S -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson R21S Dynamic Vocal Microphone (3-Pack)
Dynamic Microphones, Microphones, Proaudio, Samson TechnologiesSamson R21S Dynamic Vocal Microphone (3-Pack)
The Samson R21S Handheld Microphone is ideal for speech and vocal capturing during performances, public speech or recording.
Key Features
- Cardioid Polar Pattern
- Includes XLR Cable
- Includes Stand Mount
- On/Off Switch
SKU: SAR21 -
Dynamic Microphones, Microphones, Proaudio, Samson Technologies
Samson R31S Hypercardioid Handheld Microphone
Dynamic Microphones, Microphones, Proaudio, Samson TechnologiesSamson R31S Hypercardioid Handheld Microphone
Samson‘s R31S Dynamic Microphone brings great sound and versatility to a variety of live performance applications. Perfect for live vocals, instruments and more.Key Features
- Hypercardioid Polar Pattern
- XLR to 1/4″ Mic Cable
- Includes Mic Clip
- On/Off Switch
SKU: SCR31S -
ACCESSORIES, Filters And Screens, Proaudio, Samson Technologies, Sound Shield
Samson RC10 Studio Reflection Microphone Filter
ACCESSORIES, Filters And Screens, Proaudio, Samson Technologies, Sound ShieldSamson RC10 Studio Reflection Microphone Filter
SKU: SARC10The RC10 Studio Reflection Microphone Filter by Samson is an optimal solution for recording vocalists or voiceover artists in less than stellar acoustic spaces.Key Features
- Lightweight, Portable Reflection Filter
- Compact Microphone Isolation Solution
- Absorbs Unwanted Noise & Reflections
- Aluminum Framing
- Steel Filter Mount
- Mounts Directly onto Mic Stands
- Easily Adjust Depth and Height of Shield
- Adapters Fit 5/8″ Mic Clip/Shockmounts
- Includes all Mounting Hardwar
SKU: SARC10 -
Proaudio, Studio Monitors
Samson Resolv SE5 Active 5″ Studio Monitor – Pair
Each Resolv SE5 Two-Way Active 5″ Studio Monitor from Samson features 70 watts of power, a dedicated power amp and an electronic crossover. The 5″ woven carbon fiber woofer provides tight and controlled low frequency response, while its 1.25″ soft dome tweeter gives the high frequencies a natural sound without unwanted resonance
Key Features
- 5″ Carbon Fiber Woofer and 1.25″ Tweeter
- 70 Watts RMS
- 1/4″ TRS and RCA Inputs
- 4-Position High Frequency Lift Control
- Active Crossover with Multi-Pole Design
- Solid MDF Construction
SKU: SARESSE5 -
Proaudio, Samson Technologies, Studio Monitors
Samson Resolv SE6 Two-Way Active 6.5″ Studio Monitor (Pair)
Proaudio, Samson Technologies, Studio MonitorsSamson Resolv SE6 Two-Way Active 6.5″ Studio Monitor (Pair)
SKU: SARESSE6
Key Features
- 6.5″ Carbon Fiber Woofer & 1.25″ Tweeter
- 100 Watts RMS
- XLR, 1/4″ TRS & RCA Inputs
- 4-Position High Frequency Lift Control
- Active Crossover with Multi-Pole Design
- Solid MDF Construction
SKU: SARESSE6 -
Proaudio, Samson Technologies, Studio Monitors
Samson Resolv SE8 8-inch Studio Monitor
SKU: SARESSE8
Each Resolv SE8 Two-Way Active 8″ Studio Monitor from Samson features 100 watts of power, a dedicated power amp and an electronic crossover. The 8″ woven carbon-fiber woofer provides tight and controlled low-frequency response, while its 1.25″ soft dome tweeter gives the high frequencies a natural sound without unwanted resonanceKey Features
- 8″ Carbon-Fiber Woofer and 1.25″ Tweeter
- 100 Watts RMS
- XLR, 1/4″ TRS and RCA Inputs
- 4-Position High-Frequency Lift Control
- Active Crossover with Multi-Pole Design
- Solid MDF Construction
SKU: SARESSE8 -
Live Sound, PA Speakers, Proaudio, Samson Technologies
Samson RS15HD Resound 15″ 2-Way Passive Loud Speaker – Pair
Live Sound, PA Speakers, Proaudio, Samson TechnologiesSamson RS15HD Resound 15″ 2-Way Passive Loud Speaker – Pair
The Samson RS15HD Resound 2-Way Passive Loud Speaker features a 15″ woofer, 1.5″ titanium high-frequency driver and handles up to 300 watts RMS (600 watts peak). This affordable speaker is an ideal choice for moderate sound reinforcement applications in halls and venues.
Key Features
- 300 Watt RMS
- 600 Watt Peak
- 15″ Low Frequency Driver
- 1.5″ Titanium Compression Driver
- Durable Wood Enclosure
- Dual 1/4″ Phone and Speakon Connections
SKU: RS15HD
