No products in the cart.
RODE Microphones
Welcome to RODE Microphones – a uniquely Australian owned and operated audio company. Our home is in beautiful Sydney, just 20km west of Sydney’s downtown area and right near the home of the Sydney 2000 Olympics.
RODE Microphones
Showing 1–20 of 97 results
- Proaudio, RODE Microphones, Studio Monitors
PreSonus Eris E44 Active Nearfield Monitor (Single)
SKU: ERIS E44
Key Features
- Dual 4.5″ LF/Midrange Drivers
- 1.25″ Silk-Dome HF Driver
- 90/140W Class A/B Bi-Amplification
- Comprehensive Protection Circuits
- XLR, 1/4″, and RCA Inputs
- Acoustic Tuning Controls
- Acoustic Space Settings
- Low-Cut Filter (Flat, 80, 100 Hz)
- Includes Power Cord and Foam Feet
- Includes Studio One Prime + Studio Mag
SKU: ERIS E44 - Audio & Midi Interfaces, Proaudio, RODE Microphones, USB Audio Interfaces
Rode AI-1 Studio-Quality USB Audio Interface
Audio & Midi Interfaces, Proaudio, RODE Microphones, USB Audio InterfacesRode AI-1 Studio-Quality USB Audio Interface
The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer
Key Features
- High-Speed USB-C Audio Interface
- 96 kHz / 24-Bit
- Premium Discrete Headphone Amplifier
- Single Combo XLR-1/4″ Input
- Phantom Power for Condenser Microphones
- Two 1/4″ Monitor Outputs
- Zero-Latency Monitoring
- Includes Ableton Live Lite
- Includes USB Cable
SKU: AI-1 - Audio & Midi Interfaces, Proaudio, RODE Microphones, USB Audio Interfaces
Rode AI-Micro compact 2-Channel USB Audio Interface
Audio & Midi Interfaces, Proaudio, RODE Microphones, USB Audio InterfacesRode AI-Micro compact 2-Channel USB Audio Interface
SKU: UR22C RP
Key Features
- High-Speed USB 3.0 Computer Interface
- Includes ST-M01 Studio Condenser Mic
- Includes ST-H01 Headphones
- Included Recording Software
- 32-Bit A/D for Increased Dynamic Range
- 192 kHz Recording for High Resolution
- Record Mics, Line, and Hi-Z Instruments
- Monitor and Headphone Output Jacks
- Bus-Powered with Optional 5V DC Port
- Works with Mac, Windows, and iOS
SKU: UA1 - ACCESSORIES, Cables And Connectors, Proaudio, RODE Microphones
Rode DC-USB1 USB Power Cable for RODECaster Pro with Locking Connector
ACCESSORIES, Cables And Connectors, Proaudio, RODE MicrophonesRode DC-USB1 USB Power Cable for RODECaster Pro with Locking Connector
SKU:DCUSB1
Key Features
- Power Adapter for RODECaster Pro
- Use RODECaster Pro with 2.4A USB Power
- Makes RODECaster Pro Portable
Power your RODECaster Pro with any compatible USB output with the RODE DC-USB1. This power cable lets you plug your RODECaster Pro into any USB Type-A power brick or USB Type-A PSU rated for a minimum of 2.4A. With this cable and your own compatible power source, you’ll find the RODECaster Pro is now completely portable.
SKU: RDCUSB1 - ACCESSORIES, Cables And Connectors, Proaudio, RODE Microphones
Rode DCS-1 Dual Cold Shoe Mount and Splitter Cable Kit
ACCESSORIES, Cables And Connectors, Proaudio, RODE MicrophonesRode DCS-1 Dual Cold Shoe Mount and Splitter Cable Kit
SKU: RODCS1
The Rode DCS-1 Dual Cold Shoe Mount and Splitter Cable Kit is a problem-solving accessory for videographers and filmmakers.
Key Features
- Attaches Two Devices to One Shoe Mount
- Integrated Cable Management Slots
- Connects Two Mono Outs to a Stereo Input
- Keeps Input Sources on Separate Channels
SKU: RDCS-1 - ACCESSORIES, Filters And Screens, Proaudio, RODE Microphones
Rode DeadCat GO Artificial Fur Wind Shield
ACCESSORIES, Filters And Screens, Proaudio, RODE MicrophonesRode DeadCat GO Artificial Fur Wind Shield
SKU: DeadCat Go
Key Features
- Furry Wind Cover for the VideoMic GO
- Minimizes Wind Noise
The Rode DeadCat GO is a furry wind cover for the VideoMic GO, designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur is specially designed to minimize wind noise while remaining acoustically transparent.
SKU: RDCGO - ACCESSORIES, Filters And Screens, Proaudio, RODE Microphones
Rode DeadCat GO Artificial Fur Wind Shield for the VideoMic GO
ACCESSORIES, Filters And Screens, Proaudio, RODE MicrophonesRode DeadCat GO Artificial Fur Wind Shield for the VideoMic GO
SKU: DEADCAT GO
The Rode DeadCat GO is a furry wind cover for the VideoMic GO, designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur is specially designed to minimize wind noise while remaining acoustically transparent.
Key Features
- Furry Wind Cover for the VideoMic GO
- Minimizes Wind Noise
SKU: DEADCAT GO - ACCESSORIES, Filters And Screens, Proaudio, RODE Microphones
Rode DeadCat VMPR+ Artificial Fur Windshield
ACCESSORIES, Filters And Screens, Proaudio, RODE MicrophonesRode DeadCat VMPR+ Artificial Fur Windshield
SKU: DEADCAT VMPRP
The Rode DeadCat VMPR+ is a furry windshield for the VideoMic Pro Plus on-camera shotgun microphone, designed to reduce wind noise when recording outdoors in windy environments.
Key Features
- Minimizes Wind Noise
- Acoustically Transparent Artificial Fur
- Open-Cell Foam Surround
- Rubber Base for a Secure Fit
SKU: RDCVMPR+ - ACCESSORIES, Filters And Screens, Proaudio, RODE Microphones
Rode DeadMouse-Pin Windshield
SKU: DEADMOUSE-PIN
The DeadMouse-Pin from Rode Microphones is a professional grade windshield, designed to minimize wind noise to ensure quality recordings in adverse environments. It is designed for use with the PinMic microphone.
SKU: DEADMOUSE-PIN - ACCESSORIES, Cables And Connectors, Proaudio, RODE Microphones
Rode HJA-4 3.5mm TRS to 1/4″ Headphone Adapters
ACCESSORIES, Cables And Connectors, Proaudio, RODE MicrophonesRode HJA-4 3.5mm TRS to 1/4″ Headphone Adapters
SKU: HJA-4
The RODE HJA-4. This is a pack of four adapters for converting the 3.5mm plugs found on most consumer headphones to the larger 1/4″ connections found on most headphone amplifiers.
Key Features
- 4 x 3.5mm to 1/4″ Headphone Adapters
- Use Consumer Headphones with Pro Gear
- For RODECaster Pro
- For AI-1
SKU: HJA-4 - DSLR & Smart Phones Microphones, Microphones, Proaudio, RODE Microphones
Rode Lavalier GO Lavalier Microphone
DSLR & Smart Phones Microphones, Microphones, Proaudio, RODE MicrophonesRode Lavalier GO Lavalier Microphone
SKU: LAVGO
Key Features
- For Mobile Journalist, Videographer
- Clip-On Mic for Rode Wireless GO Systems
- Gold-Plated 3.5mm TRS Connector
- Durable 3.9′ Kevlar-Reinforced Cable
- Discreet Black, Easy to Conceal
- Omni Polar Pattern for 360° Pickup
- Wide 20 Hz to 20 kHz Frequency Response
- Pop Shield Reduces Vocal Plosives
- Mic Clip with Cable Management
- Compatible with Many 3.5mm Transmitters
SKU: LAVGO - Condenser Microphones, Microphones, Proaudio, RODE Microphones
Rode M3 Condenser Microphone
SKU: M3
The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location.
Key Features
- Heavy-Duty Metal Body
- Internal Capsule Shockmount
- High Level of RF Rejection
- On-Mic Selectable High-Pass Filter
- Heat-Treated High-Strength Mesh Head
- 9V Battery, 24V or 48V Phantom Power
- Battery Status Indicator
- Includes Windshield and Mic Clip
- Zip Pouch
SKU: M3 - Dynamic Microphones, Proaudio, RODE Microphones
Rode M5 Small-diaphragm Condenser Microphone
SKU: M5-MP
Each of this matched pair of M5 Compact 1/2″ Condenser Microphones from Rode features a cardioid polar pattern, an all-metal body, active electronics, and a 20 Hz to 20 kHz frequency response.
Key Features
- 1/2″ Capsule with Gold-Plated Membrane
- Cardioid Polar Pattern
- All-Metal Body
- Ultra-Low Noise
- Includes Microphone Clips
- Includes Windshields
SKU: M5-MP - ACCESSORIES, Mounts And Stands, Proaudio, RODE Microphones
Rode MagClip GO Magnet Clip for the Wireless GO Transmitter
ACCESSORIES, Mounts And Stands, Proaudio, RODE MicrophonesRode MagClip GO Magnet Clip for the Wireless GO Transmitter
SKU: MAGCLIP GO
Turn your Wireless GO Transmitter into a piece of wearable tech with the RODE MagClip GO, a magnetic clip that lets you affix the transmitter to nearly any piece of clothing. Clip the transmitter to a tie, a shirt collar and more. Position the mic with complete flexibility.
Key Features
- Clips Wireless GO Transmitter to Clothes
- Magnet Clip Keeps Clothes in Place
- Provides Complete Flexibility
SKU: MAGCLIP GO - ACCESSORIES, DSLR & Smart Phones Microphones, Proaudio, RODE Microphones
Rode MiCon-11 Connector for TRRS Devices
ACCESSORIES, DSLR & Smart Phones Microphones, Proaudio, RODE MicrophonesRode MiCon-11 Connector for TRRS Devices
The Rode MiCon Connector for TRRS Devices & Smartphones provides seamless integration between the Rode HS1 headset, PinMic, and Lavalier microphones and a wide range of wireless systems.
Key Features
- connect to the TRRS devices such as the iPhone, iPad, iPod touch
- selected Android devices.
SKU: MICON-11 - ACCESSORIES, Mounts And Stands, Proaudio, RODE Microphones
Rode Micro Boompole 3-Section Telescopic Boompole
ACCESSORIES, Mounts And Stands, Proaudio, RODE MicrophonesRode Micro Boompole 3-Section Telescopic Boompole
SKU: MICRO BOOMPOLEThe Micro Boompole from Rode is a convenient and portable three-piece boompole. Lightweight and precision balanced, the anodized aluminum pole features intuitive twist locks for smooth extension.Key Features
- For Video and Electronic News Gathering
- Three Sections Smoothly Extend to 6.3′
- Precision Balanced and Lightweight
- Anodized Aluminum Construction
- Intuitive Lock and Release System
- Ergonomic Grip Handle
SKU: MICRO BOOMPOLE
