, , ,

MXL 990 Condenser Microphone with Shockmount

(1 customer review)
MXL
Availability:

Out of stock


SKU: 990

Styled in a champagne finish, the MXL 990 is a large-diaphragm condenser mic made to give home-based producers, musicians, and vocalists a cool, vintage-looking mic that sounds good and sits comfortably below the triple-digit price point.

Key Features
  • For Voice, Acoustic Instruments & Cabs
  • XLR Output for Hookup to Mic Preamp
  • 48V Phantom Powered
  • Shockmount and Stand Adapter
  • Cardioid Polar Pattern Reduces Ambience
  • High Sensitivity for Hot Output
  • Full Frequency Response
  • 6-Micron, Gold-Sputtered Diaphragm
  • Internal FET Preamp
  • Includes Carrying Case

 39,500

Out of stock

Compare

Styled in a champagne finish, the MXL 990 is a large-diaphragm condenser mic made to give home-based producers, musicians, and vocalists a cool, vintage-looking mic that sounds good and sits comfortably below the triple-digit price point. It includes a vibration-absorbing shockmount and a space-saving stand adapter, allowing professional and flexible mic placement. Plus, the supplied carrying case is perfect for safely transporting the mic and its accessories to a different recording location.

Inside the vintage-style body are quality components—a 6-micron, gold-sputtered diaphragm and an FET preamp with a balanced output. These allow the MXL 990 to impart tight lows and mids along with sweet highs. The mic’s directional response helps reduce the background noise that plagues many home recordings. Unlike battery-powered miniature mics, the MXL 990 needs to be plugged into the XLR mic input of any audio interface, mixing board, or microphone preamp that can supply 48V phantom power.

For Singers and Working Musicians

With silky highs and solid lows and midrange, the MXL 990 offers the tonal performance needed to meet the standards of analog and digital recording systems. Equally capable for vocals and instruments like piano and acoustic guitar, the MXL 990 produces full-bandwidth tone and a healthy output level that requires less gain than typical dynamic microphones.

High Quality for Home Studios

Many home recording setups don’t have the acoustic treatment that professional studios utilize to absorb and disperse sound evenly. As a result, room ambience and background noise are problems commonly experienced at home. The MXL 990 has a cardioid polar pattern, which picks up very little sound behind the mic. This enables it to capture more of the sound in front of it and less of everything else.

Phantom Powered

As a condenser mic with a FET preamp, the MXL 990 requires phantom power to operate in any environment. So, it should be connected via an XLR cable (available separately) to a mixing board, a microphone preamp, or an audio interface that can send +48V phantom power.

Shockmount and Stand Adapter

Two mounting options are included with the MXL 990. For the cleanest recordings, use the shockmount, which absorbs vibration noise. Switch to the mic stand adapter if you’re positioning the mic in an extremely tight space where the shockmount wouldn’t fit.

Features at a Glance

  • Side-address design with vintage body style
  • Condenser capsule with a 6-micron, gold-sputtered diaphragm
  • Cardioid polar pattern attenuates ambience and background noise
  • High sensitivity and full frequency response (30 Hz to 20 kHz)
  • FET preamp with balanced output
  • Internally wired with Mogami
  • XLR output connector
  • Requires 48V phantom power
  • Includes custom shockmount, mic stand adapter, and carrying case
Weight2.915 lbs
Dimensions11.9 × 7.6 × 3.5 in
Brands

MXL 990 Specs

Microphone
Form FactorStand/Boom-Mount
Sound FieldMono
Operating PrinciplePressure Gradient
Capsule1 x Condenser
Diaphragm0.79″ / 20 mm (Condenser)
Polar PatternCardioid
OrientationSide Address
CircuitrySolid-State
PadNone
High-Pass FilterNone
Performance
Frequency Range30 Hz to 20 kHz
Maximum SPL130 dB SPL Peak
Impedance200 Ohms
Sensitivity15 mV/Pa
Signal-to-Noise Ratio80 dB A-Weighted
Equivalent Noise Level20 dB A-Weighted
Connectivity
Output Connectors1 x XLR 3-Pin
Power
Operating Voltage48 V ± 4 V
Operating Current Consumption3.0 mA
Physical
MountingShockmount (Included)
Dimensionsø: 2.36 x L: 5.11″ / ø: 59.94 x L: 129.79 mm
Weight1.2 lb / 544.31 g
Packaging Info
Package Weight2.915 lb
Box Dimensions (LxWxH)11.9 x 7.6 x 3.5″

In The Box

  • MXL 990 Large-Diaphragm Cardioid Condenser Microphone (Champagne)
  • Custom Shockmount
  • Mic Stand Adapter
  • Carrying Case

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Waheed Khana

    Bought it last week safe to say great mic, recieved on time great service.

    Waheed Khana