Behringer XENYX 1202FX
Behringer XENYX 1202FX
Behringer XENYX 1202FX
Behringer XENYX 1202FX
, , ,

Behringer XENYX 1202FX 12-Channel Audio Mixer with Multi-FX Processor

BEHRINGER
Availability:

Out of stock

Add to Wishlist
Compare

The Behringer XENYX 1202FX is a mixer that offers clear and natural sound in a small and portable format. With twelve inputs, four high-quality XENYX mic preamps, a 60mm logarithmic-taper master fader, and a multi-FX processor

Key Features

  • 4 x XENYX Mic Preamps, 48 V Phantom
  • 4 x Stereo Line Inputs
  • 24-Bit, Dual-Engine Multi-FX Processor
  • 130 dB of Dynamic Range

₨ 25,000

Out of stock

Compare

Behringer XENYX 1202FX 12-Channel Audio Mixer Overview

The Behringer XENYX 1202FX 12-Channel Audio Mixer with Multi-FX Processor is a mixer that offers clear and natural sound in a small and portable format. With twelve inputs, four high-quality XENYX mic preamps, a 60mm logarithmic-taper master fader, and a multi-FX processor, this versatile mixer is ideal for a wide variety of mix and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.

The XENYX 1202FX is quick to set up and operate with all connections and controls easily reachable on the top of the unit. The first four input channels feature XENYX mic preamps on four XLR connectors, as well as four 1/4″ inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. A gain knob lets you adjust the input level and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.

The four sets of stereo inputs each feature +4/-10 switches used to match the mixer’s input sensitivity to the incoming signal. This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels.

The built-in, dual-engine multi-FX processor offers 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and a variety of multi-effects. Each channel is equipped with a post-fader FX send, which you can use to send signals to the FX processor or an external processor. The FX-to-Main knob allows you to control the level of the effect in your main mix.

The CD/tape section provides an easy way to connect an external 2-track recorder and/or playback device. The CD/tape inputs are assignable to either the main mix or to the control room/phones outputs. The main mix fader controls the signal at both the main outs and CD/tape output, while a dedicated knob adjusts the volume for the phone/control room outputs.

Key Features

  • A compact and versatile 12-channel analog mixer for small-stage gigs or mid-size corporate events
  • Four, quality XENYX microphone preamps with 130 dB of dynamic range
  • Switchable 48V phantom power
  • Four, balanced mono line inputs
  • Four, unbalanced stereo pairs of line inputs
  • 24-bit, dual-engine multi-FX processor with 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and more
  • Neo-classic, British-style 3-band EQs for warm and musical sound
  • One, mono, post-fader FX-send knob per channel for internal FX processor and/or as send to the external processor
  • Main mix outputs and separate control room, phones, and stereo CD/tape outputs
  • CD/tape inputs assignable to main mix or control room/phones outputs
  • Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
  • Long-wearing 60mm logarithmic-taper master fader and sealed rotary controls
  • Designed and engineered in Germany
SKU: 1202FX Categories: , , , Tags: , , , , , , , , , , ,
Weight5.85 lbs
Dimensions14.45 × 11.8 × 5.2 in
Brands

Microphone Inputs4 x XLR, electronically balanced, discrete input circuit

XENYX microphone preamps with 48 V phantom power (switchable)

Microphone EIN(EIN 20 Hz to 20 kHz)

At 0 Ohm Source Resistance: -132.7 dB / 137 dB A-weighted
At 50 Ohms Source Resistance: -130 dB / 133.9 dB A-weighted
At 150 Ohms Source Resistance: -127.1 dB / 130.9 dB A-weighted

Frequency Response: <10 Hz to 200 kHz (-1 dB)

Gain Range: +10 to +60 dB

Maximum Input Level: +12 dBu at +10 dB gain

Impedance: 2.6 kOhms, approximately

Signal-to-Noise Ratio: -107 dB / -111 dB A-weighted (0 dBu In at +22 dB gain)

Distortion (THD+N): 0.005% / 0.003% A-weighted

Line Inputs4 x 1/4″ / 6.3 mm TRS, electronically balanced

Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately)

Gain Range: -10 to +40 dB

Maximum Input Level: +20 dBu at 0 dB gain

Fade-Out/Crosstalk AttenuationMain Fader Closed: 85 dB

Channel Fader Closed: 88 dB

Frequency ResponseMicrophone Input to Main Out:
<10 Hz to 80 kHz (+0 db/-1 dB)
<10 Hz to 137 kHz (+0 db/-3 dB)
Stereo Line Inputs4 x pairs of 1/4″ / 6.3 mm TRS, electronically balanced

Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately, +4 dBu operating level)

Maximum Input Level: +22 dBu

Equalization(EQ mono channels)

Low: 80 Hz (±15 dB)
Mid: 2.5 kHz (±15 dB)
High: 12 kHz (±15 dB)

FX Send1 x 1/4″ / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu

Main Outputs2 x 1/4″ / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu

Control Room Outputs2 x 1/4″ / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu

Headphone Output1 x 1/4″ / 6.3 mm TRS, stereo, unbalanced

Impedance: 150 Ohms (+25 dBm)

Maximum Output Level: +19 dBu

Tape I/O1 x pair RCA, stereo, unbalanced CD/tape inputs

1 x pair RCA, stereo, unbalanced tape outputs

NoiseMain Mix at -∞, Channel Fader at -∞: -105 dB / -108 dB A-weighted

Main Mix at 0 dB, Channel Fader at -∞: -94 dB / -97 dB A-weighted

Main Mix at 0 dB, Channel Fader at 0 dB: -83 dB / -85 dB A-weighted

FX SectionConverter: 24-bit Sigma-Delta

Sampling Rate: 40 kHz

AC AdapterInput: 120 V, 60 Hz

Output: 2 x 14.8 V, 2 x 500 mA

Dimensions (H x W x D)1.9 x 8.7 x 9.5″ / 47 x 220 x 242 mm
Weight4.6 lb / 2.1 kg (approximately)
Packaging Info
Package Weight5.85 lb
Box Dimensions (LxWxH)14.45 x 11.8 x 5.2″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Behringer XENYX 1202FX 12-Channel Audio Mixer with Multi-FX Processor”

There are no reviews yet.

Related products