Proaudio
Showing 841–860 of 1368 results
-
Proaudio, Windscreen
Rode Dead Cat Wind Muff for VideoMic, NTG1 and NTG2 Microphones
SKU: DeadCatThe Rode Dead Cat Wind Muff is a zip-on furry cover with deep artificial fur that fits snugly over the Rode VideoMic or the NTG1 and NTG2 microphones. The Wind Muff greatly reduces wind noise when recording in windy conditions.Key Features
- For the Rode NTG1 and NTG2
- Zip on Wind Muff
- Works with the Rode VideoMic
The Rode Dead Cat Wind Muff is a zip-on furry cover with deep artificial fur that fits snugly over the Rode VideoMic or the NTG1 and NTG2 microphones. The Wind Muff greatly reduces wind noise when recording in windy conditions.SKU: DEAD CAT -
Filters And Screens, ACCESSORIES, Proaudio, RODE Microphones, Windscreen
Rode DeadCat GO Artificial Fur Wind Shield
Filters And Screens, ACCESSORIES, Proaudio, RODE Microphones, WindscreenRode DeadCat GO Artificial Fur Wind Shield
SKU: DeadCat Go
Key Features
- Furry Wind Cover for the VideoMic GO
- Minimizes Wind Noise
The Rode DeadCat GO is a furry wind cover for the VideoMic GO, designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur is specially designed to minimize wind noise while remaining acoustically transparent.
SKU: RDCGO -
Proaudio, ACCESSORIES, Filters And Screens, RODE Microphones
Rode DeadCat GO Artificial Fur Wind Shield for the VideoMic GO
Proaudio, ACCESSORIES, Filters And Screens, RODE MicrophonesRode DeadCat GO Artificial Fur Wind Shield for the VideoMic GO
SKU: DEADCAT GO
The Rode DeadCat GO is a furry wind cover for the VideoMic GO, designed for use indoors to protect from air conditioner drafts, and outdoors to protect from wind noise. Its artificial fur is specially designed to minimize wind noise while remaining acoustically transparent.
Key Features
- Furry Wind Cover for the VideoMic GO
- Minimizes Wind Noise
SKU: DEADCAT GO -
Filters And Screens, ACCESSORIES, Proaudio, RODE Microphones, Windscreen
Rode DeadCat VMPR+ Artificial Fur Windshield
Filters And Screens, ACCESSORIES, Proaudio, RODE Microphones, WindscreenRode DeadCat VMPR+ Artificial Fur Windshield
SKU: DEADCAT VMPRP
The Rode DeadCat VMPR+ is a furry windshield for the VideoMic Pro Plus on-camera shotgun microphone, designed to reduce wind noise when recording outdoors in windy environments.
Key Features
- Minimizes Wind Noise
- Acoustically Transparent Artificial Fur
- Open-Cell Foam Surround
- Rubber Base for a Secure Fit
SKU: RDCVMPR+ -
Proaudio, ACCESSORIES, Filters And Screens, RODE Microphones, Windscreen
Rode DeadMouse-Pin Windshield
Proaudio, ACCESSORIES, Filters And Screens, RODE Microphones, WindscreenRode DeadMouse-Pin Windshield
SKU: DEADMOUSE-PIN
The DeadMouse-Pin from Rode Microphones is a professional grade windshield, designed to minimize wind noise to ensure quality recordings in adverse environments. It is designed for use with the PinMic microphone.
SKU: DEADMOUSE-PIN -
Cables And Connectors, ACCESSORIES, Audio Connectors, Proaudio, RODE Microphones
Rode HJA-4 3.5mm TRS to 1/4″ Headphone Adapters
Cables And Connectors, ACCESSORIES, Audio Connectors, Proaudio, RODE MicrophonesRode HJA-4 3.5mm TRS to 1/4″ Headphone Adapters
SKU: HJA-4
The RODE HJA-4. This is a pack of four adapters for converting the 3.5mm plugs found on most consumer headphones to the larger 1/4″ connections found on most headphone amplifiers.
Key Features
- 4 x 3.5mm to 1/4″ Headphone Adapters
- Use Consumer Headphones with Pro Gear
- For RODECaster Pro
- For AI-1
SKU: HJA-4 -
Conference Microphone, Lavalier Microphone, Microphones, Proaudio, RODE Microphones
RODE HS2 Lightweight Headset Microphone Black/Large
Conference Microphone, Lavalier Microphone, Microphones, Proaudio, RODE MicrophonesRODE HS2 Lightweight Headset Microphone Black/Large
Key Features
- Low-Profile Ergonomic Design
- Ultra-Lightweight Construction
- Adjustable Stainless-Steel Boom Arm
- Hypoallergenic Silicone Ear Strips
- Durable Ceramic-Painted Finish
- Available in Small or Large Size
- Low-Handling Noise
- Mini-Furry & Pop Filter/ Windshield
- Kevlar Braided-Reinforced Shielded Cable
- Gold Plated 1/8″ TRS Output
RODE HS2 Lightweight Headset Microphone is an ergonomic, low-profile microphone that produces crisp, clear audio for events like conferences, presentations, and public speaking—or any other situation where a microphone must be placed close to the presenter’s mouth.
SKU: RHS2B/L -
Condenser Microphones, Microphones, RODE Microphones
RODE K2 Tube Condenser Microphone With Variable Pattern Studio
Condenser Microphones, Microphones, RODE MicrophonesRODE K2 Tube Condenser Microphone With Variable Pattern Studio
Features
- Class-A Valve Circuitry
- Variable Polar Patterns
- Wide Dynamic Range
The Rode K2 boasts a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transients. An external power supply provides user access of up to 3 polar patterns. Cardioid, omnidirectional, and figure eight are all available and the patterns are user variable, allowing custom contouring of each pattern as needed.
SKU: RK2 -
DSLR & Smart Phones Microphones, Lavalier Microphone, Microphones, Proaudio, RODE Microphones
Rode Lavalier GO Lavalier Microphone
DSLR & Smart Phones Microphones, Lavalier Microphone, Microphones, Proaudio, RODE MicrophonesRode Lavalier GO Lavalier Microphone
Key Features
- For Mobile Journalist, Videographer
- Clip-On Mic for Rode Wireless GO Systems
- Gold-Plated 3.5mm TRS Connector
- Durable 3.9′ Kevlar-Reinforced Cable
- Discreet Black, Easy to Conceal
- Omni Polar Pattern for 360° Pickup
- Wide 20 Hz to 20 kHz Frequency Response
- Pop Shield Reduces Vocal Plosives
- Mic Clip with Cable Management
- Compatible with Many 3.5mm Transmitters
SKU: LAVGO -
Proaudio, Conference Microphone, Lavalier Microphone, Microphones, RODE Microphones
RODE Lavalier II Omnidirectional Lavalier Microphone (Black)
Proaudio, Conference Microphone, Lavalier Microphone, Microphones, RODE MicrophonesRODE Lavalier II Omnidirectional Lavalier Microphone (Black)
Key Features- Content Makers, Vloggers & Filmmakers
- Innovative Low-Profile Design
- Detailed Voice Capture with Neutral Tone
- Omni Pattern for 360° Sound Pickup
- 3.5mm TRS Locking Output Connector
- Flat Cable Is Easy to Thread and Hide
- Compact and Versatile Mounting Clip
- Pop Shield and Furry Windshield
- Colored ID Rings and Zip Wallet
SKU: LAVALIER-II -
Dynamic Microphones, Microphones, Proaudio, RODE Microphones
Rode M1-S Live Performance Dynamic Microphone
Dynamic Microphones, Microphones, Proaudio, RODE MicrophonesRode M1-S Live Performance Dynamic Microphone
Features:
- Live performance
- dyanamic microphone for vocals
- High-power neodymium capsule
- Tightly controlled cardioid polar pattern
- Robust, all-metal body
- Integrated on/off switch with locking screw
- Lifetime warranty
Designed for live Performance, the Rode M1-S is a dynamic microphone with an unwavering construction. It has a high-power neodymium capsule that produces incredibly clear and warm responses.
SKU: RM1-SLP -
Proaudio, Condenser Microphones, Microphones, RODE Microphones
Rode M3 Condenser Microphone
Key Features
- Heavy-Duty Metal Body
- Internal Capsule Shockmount
- High Level of RF Rejection
- On-Mic Selectable High-Pass Filter
- Heat-Treated High-Strength Mesh Head
- 9V Battery, 24V or 48V Phantom Power
- Battery Status Indicator
- Includes Windshield and Mic Clip
- Zip Pouch
SKU: M3 -
Mounts And Stands, ACCESSORIES, Microphone Clips/Clamp, Proaudio, RODE Microphones
Rode MagClip GO Magnet Clip for the Wireless GO Transmitter
Mounts And Stands, ACCESSORIES, Microphone Clips/Clamp, Proaudio, RODE MicrophonesRode MagClip GO Magnet Clip for the Wireless GO Transmitter
SKU: MAGCLIP GO
Turn your Wireless GO Transmitter into a piece of wearable tech with the RODE MagClip GO, a magnetic clip that lets you affix the transmitter to nearly any piece of clothing. Clip the transmitter to a tie, a shirt collar and more. Position the mic with complete flexibility.
Key Features
- Clips Wireless GO Transmitter to Clothes
- Magnet Clip Keeps Clothes in Place
- Provides Complete Flexibility
SKU: MAGCLIP GO -
Proaudio, ACCESSORIES, DSLR & Smart Phones Microphones, Lavalier Microphone, RODE Microphones
Rode MiCon-11 Connector for TRRS Devices
Proaudio, ACCESSORIES, DSLR & Smart Phones Microphones, Lavalier Microphone, RODE MicrophonesRode MiCon-11 Connector for TRRS Devices
Key Features
- connect to the TRRS devices such as the iPhone, iPad, iPod touch
- selected Android devices.
The Rode MiCon Connector for TRRS Devices & Smartphones provides seamless integration between the Rode HS1 headset, PinMic, and Lavalier microphones and a wide range of wireless systems.
SKU: MICON-11 -
Mounts And Stands, ACCESSORIES, Boompole, Proaudio, RODE Microphones
Rode Micro Boompole 3-Section Telescopic Boompole
Mounts And Stands, ACCESSORIES, Boompole, Proaudio, RODE MicrophonesRode Micro Boompole 3-Section Telescopic Boompole
SKU: MICRO BOOMPOLEThe Micro Boompole from Rode is a convenient and portable three-piece boompole. Lightweight and precision balanced, the anodized aluminum pole features intuitive twist locks for smooth extension.Key Features
- For Video and Electronic News Gathering
- Three Sections Smoothly Extend to 6.3′
- Precision Balanced and Lightweight
- Anodized Aluminum Construction
- Intuitive Lock and Release System
- Ergonomic Grip Handle
SKU: MICRO BOOMPOLE
