No products in the cart.
Headphone Amplifier, Proaudio, Processors and Amplifiers, Zoom audio
Zoom ZHA-4 Handy Headphone Amplifier
Availability:
In stock
Perfect for mobile recording setups and podcasting, the Zoom ZHA-4 Handy Headphone Amplifier lets up to four people monitor audio from their headphones, dictating their own levels all the while.
Key Features
- 4 Channels of Headphone Monitoring
- Great for Podcasting & Mobile Recording
- 4 Outputs, Volume Knobs & Mute Switches
- Powered via 2 x AA Batteries
- Up to 4.5 Hour Battery Life
- Accepts Bus Power over USB Type-C
- Includes 19″ Auxiliary Cable
₨ 17,000
In stock
CompareZoom ZHA-4 Handy Headphone Amplifier Overview
Perfect for mobile recording setups and podcasting, the Zoom ZHA-4 Handy Headphone Amplifier lets up to four people monitor audio from their headphones, dictating their own levels all the while. Four headphone outputs are on hand, as are four individual volume knobs to control levels, and four individual mute buttons.
This is a battery-powered device, lasting between 3.5 and 4.5 hours on a single pair of AA batteries. However, you can also power it straight from portable power packs over USB Type-C. A 19″ stereo aux cable is included with your purchase of the Zoom ZHA-4 Handy Headphone Amplifier.
Key Features
- 4 Channels of Headphone Monitoring
- Great for Podcasting & Mobile Recording
- 4 Outputs, Volume Knobs & Mute Switches
- Powered via 2 x AA Batteries
- Up to 4.5 Hour Battery Life
- Accepts Bus Power over USB Type-C
- Includes 19″ Auxiliary Cable
| Weight | 0.8 lbs |
|---|---|
| Dimensions | 7.7 × 5.2 × 3.1 in |
Zoom ZHA-4 Specs
| Form Factor | Portable |
| Number of Headphone Channels | 4-Channel |
| Recommended Headphone Impedance | Not Specified by Manufacturer |
| Headphone Output Power | Not Specified by Manufacturer |
| EQ | None |
| Display | None |
Connectivity
| Analog Audio I/O | 1 x 1/8″ / 3.5 mm TRS Unbalanced Stereo Headphone Input 4 x 1/8″ / 3.5 mm TRS Unbalanced Stereo Headphone Output (Rear Panel) |
| Digital Audio I/O | None |
| Network I/O | None |
| USB | 1 x USB-C (Power/Charging Input) |
Performance
| Frequency Response | 10 Hz to 50 kHz ±1 dB |
| Gain/Trim Range | 24 dB |
| Dynamic Range | ≥ 100 dB |
| Impedance | Headphone Outputs: 47 Ohm (Unbalanced) Headphone Inputs: 10 Kilohm |
Power
| Power Requirements | Battery, USB Bus Power |
| DC Input Power | 5 VDC at 1A (USB Bus Power) |
| Battery Type | 2 x AA |
| Approximate Battery Life | 3.5 Hours (AA Alkaline) 4.5 Hours (AA NiMH) |
Physical
| Dimensions | 5.1 x 2.8 x 2″ / 130 x 70 x 52 mm |
| Weight | 6.3 oz / 180.0 g |
Packaging Info
| Package Weight | 0.8 lb |
| Box Dimensions (LxWxH) | 7.7 x 5.2 x 3.1″ |
In The Box
- Zoom ZHA-4 Handy Headphone Amplifier
- Stereo Audio Cable (19″)
Based on 0 reviews
Be the first to review “Zoom ZHA-4 Handy Headphone Amplifier”
Related products
- Proaudio, Behringer, Processors and Amplifiers, Tube Amplifiers
Behringer MIC500USB Audiophile Vacuum Tube Preamplifier
Proaudio, Behringer, Processors and Amplifiers, Tube AmplifiersBehringer MIC500USB Audiophile Vacuum Tube Preamplifier
Behringer MIC500USB Tube Microphone Preamp affordably delivers high-end, tube-driven pre-amplification for all microphone, instrument, and line-level sources.
Key Features
- High-end pre-amplification for all microphone, instrument and line-level sources.
- Specifically designed for studio-grade condenser mics
- Perfectly matches your studio, live and hard disk recording set-up
- Ultra-flexible Preamp Modeling allows you to optimize your recordings
- Choose between 16 preamp voicings designed for electric and acoustic guitars, keyboards, bass guitars, drums, vocals and more
- Built-in USB/Audio Interface to connect directly to your computer.
- Powerful Phones output with Level control and Direct Monitor select
- Hand-selected 12AX7 vacuum tube with UTC technology for exceptional warmth and lowest noise
- Ensures outstanding signal transparency when used as a high-end DI-box
- Sophisticated output limiter prevents the output signal from clipping
- Dedicated low cut filter eliminates unwanted noise, e.g. floor rumble
- +48 V phantom power, Phase Reverse switch and 20 dB Pad for utmost flexibility
- Highly accurate 8-segment LED level meter
- Balanced inputs and outputs on 1/4″ TRS and XLR connectors
SKU: MIC500USB - Proaudio, Behringer, Headphone Amplifier, Processors and Amplifiers
Behringer Powerplay P16-I 16-channel ADAT Input Module
Proaudio, Behringer, Headphone Amplifier, Processors and AmplifiersBehringer Powerplay P16-I 16-channel ADAT Input Module
Behringer Powerplay P16-I 16-channel Input Module is an easy and affordable way to distribute up to 16 channels of audio for Behringer’s Powerplay P16-M personal mixers.
Key Features
- Converts 16 analog inputs into 24-bit digital audio to be transmitted via standard CAT5e cable
- 2 x 8-channel ADAT optical inputs with auto detect and priority select
- 16 balanced, high-headroom TRS audio inputs
- State-of-the-art 24-bit A/D converters for premium audio quality
- 4-position gain switch per channel
- Digital inputs support 44.1 and 48 kHz sample rates
- Ultra-low system latency of less than 1 millisecond
- Signal Present and Clip LEDs per channel plus ADAT status LEDs
- Standard CAT5e connection delivers power and signals for up to 6 Personal Mixers
- 6 ULTRANET expansion network connectors (RJ45)
- Internal autorange power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
SKU: P16-I - Proaudio, Behringer, Processors and Amplifiers
Behringer UltraGain Pro-8 Digital ADA8000
SKU: ADA8000
Key Features
- Ultra-high quality 8-channel A/D and D/A converter for virtually any digital recording/mixing environment
- 8 state-of-the-art, studio-grade IMP “Invisible” Mic Preamps
- Phantom power on all microphone inputs
- Audiophile 24-bit A/D and D/A converters for ultimate signal integrity
- Processes 44.1 and 48 kHz sample rates
- External sample rate synchronization via wordclock or ADAT input
- Optical ADAT in/out interface for ultimate compatibility
- All mic/line inputs are routed to the ADAT output
- ADAT input can be routed to all Line outputs
SKU: ADA8000 - Proaudio, Behringer, Processors, Processors and Amplifiers
Behringer Ultra-DI Pro DI4000 V2
The Behringer Ultra-DI Pro DI4000 V2 4-channel Active Instrument Direct Box provides four active direct box channels in a single rack space enclosure.
Key Features
- Professional and multi-purpose 4-channel direct injection box for stage and studio applications
- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
- Ultra-flat frequency response due to renowned Behringer OT-1 transformers
- Allows direct connection to speaker outputs with up to 3,000 Watts
- +20 dB gain switch for pre-amplification of low-level signals
- Switchable input attenuation allows input levels of up to +40 dB
- Phase Reverse switch allows you to instantly correct phase problems
- Switchable High-cut filter (8 kHz) for guitar applications
- Ground Lift switch eliminates typical ground loop problems
- Accurate 8-segment LED level meter for optimum performance
- 1/4″ TRS and gold-plated XLR connectors
- Illuminated switches enable perfect operation in dark stage environments
- Internal switch-mode power supply (100 – 240 V~) for noise-free audio and low power consumption
SKU: DI4000 - Proaudio, Behringer, Guitar/Bass Tuner, Processors, Processors and Amplifiers
Behringer V-AMP3 Guitar Amp Modeler & Multi-Effects Processor
Proaudio, Behringer, Guitar/Bass Tuner, Processors, Processors and AmplifiersBehringer V-AMP3 Guitar Amp Modeler & Multi-Effects Processor
The Behringer V-AMP3 Guitar Amp Modeler and Multi-Effects Processor can transform your guitar rig into any vintage or modern amp/cabinet combination you can dream of, plus add studio-grade effects.
Key Features
- 32 Virtual Amp Models
- 15 Cabinet Simulators
- Latency-Free Recording
- Includes USB Interface
SKU: V-AMP3
There are no reviews yet.