, , ,

Behringer Europower PMP4000 1600W 16-Channel Powered PA Mixer with Multi-FX Processor and Feedback Eliminator

BEHRINGER

With the Behringer Europower PMP4000, a 16-channel powered PA mixer with an integrated 1600W amplifier, a 7-band graphic EQ with FBQ technology and a digital effect engine.

Key Features

  • For Bands, DJs, and Special Events
  • 16-Channel Powered Mixer
  • 2 x 800W Class-D Amplifiers (4 Ohms)
  • 8 High-Quality Microphone Preamps
  • Digital Multi-FX with 100 Presets
  • 3-Band EQ on Each Input Channel
  • 7-Band Graphic EQ with FBQ Technology
  • +48V Phantom Power for Condenser Mics
  • Mono Channel Inserts
  • Includes Power Cord

Call for Price

Behringer Europower PMP4000 Overview

With the Behringer Europower PMP4000, a 16-channel powered PA mixer with an integrated 1600W amplifier, a 7-band graphic EQ with FBQ technology, and a digital effect engine, you can mix your band while powering your preferred PA speakers. It’s ideal for touring bands, clubs, bars, and more. The Class-D amplifier can drive two PA loudspeakers with up to 800W per channel at 4 ohms.

The mixer has 1/4″ inputs for stereo channels and XLR and 1/4″ inputs for mono channels. Stereo RCA inputs are also available on inputs 9/10 and 11/12. 1/4″ inserts are provided for channels 1 through 8 so you can add your preferred outboard effects. Two main outputs, two monitor sends, and one effect send—which connects to the internal DSP with more than 100 presets—are all included in the mixer. To achieve your ideal sound, each channel has a 3-band EQ with sweepable mids. There is a power cord provided.

At a Glance

  • Ultracompact 2 x 800W stereo powered mixer (1600W bridged mode)
  • Remarkable Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Ultracompact design at nearly half the weight of conventional powered mixers
  • 16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output
  • Studio-grade 24-bit stereo FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  • 8 high-quality XENYX mic preamps with switchable +48 V phantom power for condenser microphones
  • Effective, musical 3-band EQ, switchable low-cut filter, and clip LEDs on all mono channels
  • Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
  • Voice Canceler function removes singer’s voice from recordings for karaoke applications
  • Selectable stereo (main L/R), double mono (main/monitor), or bridged mono amplifier operation mode
  • XPQ 3D stereo surround effect adds vitality and an enhanced stereo image
  • Adjustable stereo CD/tape input for connecting external signal sources
  • Multifunctional stereo preamp outputs for added flexibility
  • Internal switch-mode power supply, noise-free audio, superior transient response, and very low power consumption

View details on manufacturer’s website

Behringer Europower PMP4000 Specs

Brands

Key Specs
Number of Analog Input Channels
16 (8 Mono / 4 Stereo)
Number of Mic Preamps
8
Analog Output Channels
2x Stereo Master Output
Mix Routing
Stereo Main Mix / Mono Aux Send / Mono FX Send
Amplifier Power Rating
115 VAC, 4 Ohms:
800 W Peak per Channel
600 W RMS per Channel
115 VAC, 8 Ohms:
400 W Peak per Channel
300 W RMS per Channel
8 Ohms:
1600 W Peak Bridged
1200 W RMS Bridged
EQ
3-Band EQ
Built-In Effects
100x Effect (Type Unspecified)
USB I/O
No
Wireless
No
Rack Mountable
No
Mixer
Number of Analog Input Channels
16 (8 Mono / 4 Stereo)
Number of Mic Preamps
8
Analog Output Channels
2x Stereo Master Output
Mix Routing
Stereo Main Mix / Mono Aux Send / Mono FX Send
Faders & Level Adjustment
10x Channel Fader
2x Channel Knob
1x FX Fader
2x Bus/Subgroup Fader
2x Master Fader
Meters
1x 12-Segment LED
Meter Range
-30 dB to +10 dB Before Clip
Built-In Amplifier
Amplifier Power Rating
115 VAC, 4 Ohms:
800 W Peak per Channel
600 W RMS per Channel
115 VAC, 8 Ohms:
400 W Peak per Channel
300 W RMS per Channel
8 Ohms:
1600 W Peak Bridged
1200 W RMS Bridged
Amplifier Class
Class-D
Speaker Outputs
2x speakON NL4
Supported Load Impedance
4 Ohms per Channel (8 Ohms Maximum)
Signal Processing
Gain/Trim Range
Aux/Stereo Line Input:
+10 dB / +60 dB
Dynamic Processing
No
Sidechain Filters
No
EQ
3-Band EQ
EQ Parameters
High: ±15 dB at 12 kHz
Mid: ±15 dB at 100 Hz to 8 kHz
Low: ±15 dB at 10 Hz
Graphic EQ
7-Band , ±12 dB 63 Hz to 16 kHz
Filters
Input Channels:
High-Pass
Solo/Mute
Mute, PFL per Input Channel
Solo-in-Place/AFL per Bus, FX Bus, Master
Built-In Effects
100x Effect (Type Unspecified)
Performance
Frequency Response
10 Hz to 200 kHz -1 dB
Max Input Level
XLR Mic Input:
+12 dBu at +10 dB Gain
1/4″ Line Input:
+21 dBu (Mono)
+22 dBu (Stereo)
I/O Impedance
XLR Mic Input:
2.6 Kilohms (Balanced)
1.3 Kilohms (Unbalanced)
1/4″ TS Line Input:
20 Kilohms (Unbalanced)
1/4″ TRS, Stereo RCA Line Input:
> 3.6 Kilohms (Unbalanced)
1/4″ TRS Line Output:
150 Ohms (Unbalanced)
Stereo RCA Tape Output:
1 Kilohm
EIN
XLR Mic Input:
-134 dB (Unweighted, 0 Ohms Source Resistance)
XLR Mic Input:
-136 dB (A-Weighted, 0 Ohm Source Resistance)
XLR Mic Input:
-131.5 dB (Unweighted, 50 Ohms Source Resistance)
XLR Mic Input:
-134 dB (A-Weighted, 50 Ohm Source Resistance)
XLR Mic Input:
-129 dB (Unweighted, 150 Ohms Source Resistance)
XLR Mic Input:
-155 dB (A-Weighted, 150 Ohm Source Resistance)
SNR
Mic Input to Analog Output:
109 dB (0 dBu In at +10 dB Gain)
112 dBA (0 dBu In at +10 dB Gain)
THD+N
Mic Input to Analog Output:
0.002%
0.0018%
Connectivity
Analog Inputs
8x XLR 3-Pin Balanced Mic Input
8x 1/4″ TRS Balanced/Unbalanced Line Input
8x 1/4″ TRS Unbalanced Insert Insert
8x 1/4″ TRS Balanced/Unbalanced Line Input (4 Stereo Pair)
2x Stereo RCA Coaxial Unbalanced Stereo Line Input (1 Stereo Pair)
1x Stereo RCA Coaxial Unbalanced Stereo Tape Return
2x 1/4″ TRS Unbalanced Stereo Insert/Mix Insert
Analog Outputs
4x 1/4″ TRS Unbalanced Stereo Main Output (2 Stereo Pairs)
1x 1/4″ TRS Unbalanced Aux Output
2x 1/4″ TRS Unbalanced Monitor Send
1x 1/4″ TRS Unbalanced FX Send
1x Stereo RCA Coaxial Unbalanced Stereo Tape Send (1 Stereo Pair)
1x 1/4″ TRS Unbalanced Control Room/Headphone Output
Phantom Power
+48 V
Digital I/O
No
MIDI I/O
No
USB I/O
No
Other I/O
1x 1/4″ Footswitch Input
Wireless
No
Mobile App Compatible
No
Power
Input Power
120 VAC, 60 Hz
AC Input Power
120 VAC, 60 Hz (T 10 A H 250 V)
AC Power I/O
1x IEC Input
Power Consumption
1050 W
Physical
Rack Mountable
No
Dimensions
18.1 x 4.8 x 18.7″ / 46 x 12.2 x 47.5 cm
Weight
22.9 lb / 10.4 kg
Packaging Info
Package Weight
29.22 lb
Box Dimensions (LxWxH)
22 x 21 x 8.25″

In The Box

  • Behringer Europower PMP4000
  • Power Cord

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Behringer Europower PMP4000 1600W 16-Channel Powered PA Mixer with Multi-FX Processor and Feedback Eliminator”

There are no reviews yet.