, , ,

Rode Stereo VideoMic Pro for Video & DSLR Cameras

RODE
Availability:

In stock


The Rode Stereo VideoMic Pro for Video & DSLR Cameras builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount and higher-sensitivity X/Y capsules.

Key Features

  • Ideal for Video & DSLR Cameras
  • Integrated Rycote Lyre Shockmount
  • Matched Pair, 1/2″ Condenser Capsules
  • XY Stereo Configuration
  • Level Switch: -10 / 0 / +20 dB
  • High-Pass Filter Switch: 75 Hz
  • Kevlar-Reinforced Braided Cable
  • 1/8″ (3.5mm) Output Connector
  • 9V Battery Powered
  • Includes Foam Windscreen

 89,000

In stock

Rode Stereo VideoMic Pro for Video & DSLR Cameras Overview

The Rode Stereo VideoMic Pro for Video & DSLR Cameras builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.

The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.

FEATURES:

  • Broadcast-recording-quality on-camera microphone
  • Matched pair, 1/2″ condenser capsules in X/Y stereo configuration
  • Ultra-lightweight, compact form factor
  • Two-step high-pass filter (flat, 75 Hz)
  • Three-position level control (-10, 0, +20 dB)
  • 9V-battery-powered – over 100 hours of use (alkaline)
  • Integrated Rycote Lyre shockmount
  • Denser foam windscreen
  • 1/8″ (3.5mm) stereo mini-jack output
  • Billeted metal camera shoe mount with 3/8″ thread for easy boompole mounting

WELCOME TO THE RODE FAMILY

Rode videomic go 2 Rode videomic go Rode videomic Rode videomic pro Rode videomic pro+ Rode videomic ntg
VideoMic GO II VideoMic GO VideoMic VideoMic Pro VideoMic Pro+ VideoMic NTG
Use cases Recording dialogue, vlogging, interviews, run-and-gun shooting, filmmaking, videography & content creation, podcasting & streaming Recording dialogue, interviews, run-and-gun shooting, filmmaking, videography & content creation Recording dialogue, interviews, run-and-gun shooting, filmmaking, videography & content creation Recording dialogue, interviews, run-and-gun shooting, filmmaking, videography & content creation, live & sporting events Recording dialogue, interviews, run-and-gun shooting, filmmaking, videography & content creation, live & sporting events Recording dialogue, interviews, run-and-gun shooting, filmmaking, videography & content creation, live & sporting events, podcasting & streaming
Ideal for DSLRs, smartphone rigs, tablets, laptops and computers Camcorders, point & shoot, entry-level DSLR Camcorders, mid-range DSLR High-end DSLR, full-frame cameras High-end DSLR, full-frame cameras DSLRs, mirrorless cameras, smartphone rigs, tablets, laptops and computers
Power Supplied by device (via 3.5mm plug-in power or USB-C) Supplied by device (via 3.5mm plug-in power) 9V battery powered 9V battery powered RØDE LB-1 Lithium-Ion rechargeable battery or micro USB powered In-built rechargeable lithium-ion battery
Output connection 3.5mm TRS or digital USB-C 3.5mm TRS 3.5mm TRS 3.5mm TRS 3.5mm TRS 3.5mm auto-sensing or digital USB-C
Compatible RØDE software RØDE Connect, RØDE Central & RØDE Reporter RØDE Connect, RØDE Central & RØDE Reporter
Physical controls Highpass filter: Flat/80Hz & level switch: -10dB, 0, +20dB Highpass filter: Flat/80Hz & level switch: -10dB, 0, +20dB Highpass filter: 75Hz/150Hz, level switch: -10dB, 0, +20dB, high frequency boost & safety channel Highpass filter: 75Hz/150Hz, level switch: Infinitely variable gain control, high frequency boost & safety channel

Rode Stereo VideoMic Pro Specs

Weight 0.57 lbs
Dimensions 8.7 × 5.15 × 3.1 in
Brands

Transducer Pressure gradient
Polar Pattern XY Cardioid
Frequency Range 40 Hz to 20 kHz (selectable HPF @ 75 Hz)
Sensitivity -38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz
Output Impedance 200 Ohms
Maximum Output +4.2 dBu (@ 1% THD into 1 kOhms)
Dynamic Range 100 dB
Maximum SPL 134 dB, max (1 kHz, 1% THD into 1 kOhms load)
Signal / Noise 76 dBA (A-weighted per IED651)
Power Supply 9 V alkaline battery
Connection 1/8″ (3.5 mm) stereo mini-jack
Signal to Noise Ratio 76 dBA SPL (A-weighted per IEC651)
Dimensions (D x W x H) 4.5 x 3.1 x 5.3″ (115 x 80 x 134 mm)
Weight 0.26 lb (116 g) (without battery)
Packaging Info
Package Weight 0.57 lb
Box Dimensions (LxWxH) 8.7 x 5.15 x 3.1″

In The Box

  • RODE Stereo VideoMic Pro Rycote
  • Metal Camera Shoe Mount with 3/8″ Thread
  • Foam Windscreen

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode Stereo VideoMic Pro for Video & DSLR Cameras”

There are no reviews yet.