, ,

ADAM Audio A77H 7-inch Active 3-Way Midfield Studio Monitor – Single

ADAM AUDIO
Availability:

In stock


The ADAM Audio A77H is a professional, dual 7″ 3-way studio monitor speaker that delivers rich, spacious, and enveloping sound. A 250W RMS Class-D amplifier powers the dual 7″ Multilayer Mineral (MLM) woofers, while 70W + 20W Class A/B amplifiers drive the MLM midrange driver and X-ART tweeter with HPS waveguide to provide an ultrawide frequency range.

Key Features

  • Two 7″ Multilayer Mineral Woofer
  • 3.5″ Multilayer Midrange Driver
  • Rotatable X-ART Tweeter + HPS Waveguide
  • 250W RMS Class-D Amp for Woofers
  • 70W + 20W Class-AB Amp for Mid / X-ART
  • XLR and RCA Inputs
  • Dual Bass Ports + 3 Voice Selections
  • Room Adaptation: 4-Band Equalization
  • Ethernet for A-Control DSP Software
  • Integrated Sonarworks Room Correction

 925,000

In stock

ADAM Audio A77H 7-inch Midfield Studio Monitor Overview

Audio professionals in need of a high-quality midfield monitor will be impressed with the ADAM Audio A77H, a professional, dual 7″ 3-way studio monitor speaker that delivers rich, spacious, and enveloping sound. A 250W RMS Class-D amplifier powers the dual 7″ Multilayer Mineral (MLM) woofers, while 70W + 20W Class A/B amplifiers drive the MLM midrange driver and X-ART tweeter with HPS waveguide to provide an ultrawide frequency range. The midrange driver helps produce clear sound in the most sensitive range of human hearing. The rotatable High-Frequency Propagation System (HPS) waveguide technology and onboard DSP allow you to finely tune the speakers to your precise requirements.

Rotatable HPS Waveguide and X-ART Tweeter

  • ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad in the horizontal axis but tightly focused on the vertical plane. The A Series monitor introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology, whether you position the speakers horizontally or vertically.
  • The A Series HPS Waveguide is made from a new glass-fiber polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides a precise transient response and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed and consistent sound across the product line.

Multilayer Mineral Woofer

A Series woofers are constructed with a unique blend of mineral stone fibers that have been baked together to create a lightweight but highly stable material. The mineral composition, layering, and geometry of each cone is specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low end.

Midrange Driver

Adapted from the ADAM Audio DCH midrange driver used by the S Series speakers, the A Series midrange driver delivers a clean sound in a critical part of the frequency range, where humans are especially sensitive to coloration of sound. Using a dedicated driver for the midrange further helps clarify lows and highs by eliminating the need for woofers to reproduce midrange frequencies, and so also reduces distortion.

Adam Audio A77H Specs

Weight 46.5 lbs
Dimensions 26.38 × 19.75 × 15.25 in
Brands

Monitor Type & Configuration Active 3-Way
Number of Included Monitors Single Monitor
Enclosure Bass-Reflex/Ported, Shielded
Total Power Output 340 W RMS
Drivers
Tweeter 1 x 1″ / 25 mm Ribbon
Midrange 1 x 3.5″ / 8.9 cm Composite Cone
Woofer 2 x 7″ / 17.8 cm Composite Cone
Voice Coil: 1.5″ / 38.1 mm
Amplifiers LF: 1 x 250 W RMS / 1000 W Peak Class-D
MF: 1 x 70 W RMS / 280 W Peak Class-AB
HF: 1 x 20 W RMS / 80 W Peak Class-AB
Signal Processing
EQ 1 x HF Shelf
1 x HF Notch/Peak
1 x Low-Mid Notch/Peak
1 x LF Shelf
Filters None
Parametric EQ None
Crossover Frequency 400 Hz
3 kHz
Maximum Sampling Rate 96 kHz / 24-Bit
Connectivity
Audio I/O 1 x XLR 3-Pin Balanced Input
1 x RCA Unbalanced Input
Network I/O 1 x RJ45 Ethernet
USB None
Wireless None
Power
AC Input Power 100 to 240 VAC, 50/60 Hz
Power Consumption 500 W (Maximum)
Color Black
Mounting Points None
Dimensions (W x H x D) 20.9 x 9.3 x 13.8″ / 53.1 x 23.6 x 35 cm (Each)
Weight 37.7 lb / 17.1 kg (Each)
Packaging Info
Package Weight 46.5 lb
Box Dimensions (LxWxH) 26.38 x 19.75 x 15.25″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ADAM Audio A77H 7-inch Active 3-Way Midfield Studio Monitor – Single”

There are no reviews yet.