, ,

Sonifex HY-03T Twin Automatic Analog TBU

Sonifex

Key Features:
  • Fully automatic
  • Local and remote line hold switching
  • Momentary or permanent latching remotes can be enabled.
  • Balanced mic/line input
  • Balanced output
  • Mixed output
  • Integrated ring detector

Sonifex HY-03T Twin Automatic Analog TBU is a Telephone Balance Unit

 520,000

Sonifex HY-03T Twin Automatic Analog TBU

Sonifex HY-03T Twin Automatic Analog TBU is a 1 RU rackmount hybrid phone that was created to take the position of the HY-02. Many of the HY-02’s features are still present, and some new ones are added. Automatic signal limitation, local and remote line hold switching, a balanced mic/line input, and a balanced output are some of its primary features. Among the many other capabilities are a line limiter and a typical line balancing rejection of 28dB.

Some of the features of the HY-03 include :

  • Fully automatic – adapts to varyingline conditions and has automatic signal limiting.
  • Local and remote line hold switching – calls can be remotely switched through a mixing console.
  • Momentary or permanent latching remotes can be enabled.
  • Balanced mic/line input – 10k ohm balanced input selectable for 0dBu clean feed line, or microphone level with adjustable gain.
  • Balanced output – 0dBu low impedance balanced output, with output gain adjustment.
  • Mixed output – the output can be a mix of the caller and mic/line input signals for recording both sides of the telephone conversation.
  • Integrated ring detector – automatic call answering after a pre-determined number of rings.
  • Fitted with K-break disconnect detection as standard with an option for dial-tone disconnect using the optional HY-03DTD board. The HY-03DTD board can be configured to disconnect on recognizing the dial tone used in a specific country.
  • Line limiter, bandpass filter and output noise gate with preset threshold providing low distortion crystal clear audio.
  • 28dB typical line balance rejection.
  • Built in power supply with switchable 115V, or 230V, mains input.
  • BABT approval compliant with European PTT specifications.

Sonifex HY-03T Specification

Weight 8.8 lbs
Dimensions 10.6 × 23 × 2.7 in
Brands

Technical Specification For HY-03T

Audio Specification

Input Impedance – Line Mode (Clean Feed): 10kΩ balanced 0dB
Input Impedance – Microphone Mode: 2kΩ balanced
Clean Feed Limiting Input: +4dBu
Microphone Level Range: From 74dB to 40dB adjusted by preset pot
Bandwidth to Telephone Line: 250Hz – 4kHz, -3dB ref 1kHz
Telephone Line Impedance: Nominally 600Ω
Telephone Line Impedance Range: 300Ω to 1500Ω
Output Impedance: 50Ω balanced floating 0dBu
Output Level Range: +8dB to -14dB adjusted by preset pot
Rejection Ratio: 45dB on 1kHz tone, typically 28dB on complex waveforms, reference peak level of 0dB
Ring Detector Sensitivity: 1 ring to 6 rings
Power: 230V 50Hz, or 115V 60Hz. 6W for HY-03.

Connections

Mic/Line Input: XLR 3 pin female with push button mic/line selection
Line Output: XLR 3 pin male
Telephone Line: RJ11 6/4 socket
Telephone Handset/Instrument: RJ11 6/4 socket
Remotes: 9-way D-type socket
Power: IEC mains (CEE22)
Each unit is supplied with 1 x RJ11 to RJ11 telephone line lead, 1 x RJ11 to BT plug telephone line lead, 1 x BT handset socket to RJ11 plug adapter, IEC mains lead fitted with moulded mains plug, handbook and warranty card.

In The Box

  • Sonifex HY-03T Twin Automatic Analog TBU
  • AC Power Cord

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Sonifex HY-03T Twin Automatic Analog TBU”

There are no reviews yet.