Samson CM11B Omnidirectional Boundary Microphone
In stock
TheĀ Samson CM11BĀ is a low profile boundary microphone with an omnidirectional polar pattern. The CM11B is designed for surface mounting and excels in reproducing audio in conferences, lectures, boardroom meetings, classrooms, interviews, etc.
Key Features
- Surface mount Omni-directional boundary microphone
- Condenser element
- Half Omni Pickup Pattern
- Internal Hi-pass filter
- Mini XLR connector
- Includes 30-foot cable with mini to standard XLR connectors
- 9Ć¢ā¬ā52 Volt Phantom Power Operation
₨ 28,000
In stock
CompareSamson CM11B XLR Boundary Microphone
TheĀ Samson CM11BĀ is a low profile boundary microphone with an omnidirectional polar pattern. The CM11B is designed for surface mounting and excels in reproducing audio in conferences, lectures, boardroom meetings, classrooms, interviews, etc. The omnidirectional pick up pattern provides a 360 degree pick up area, around the perimeter of the capsule.
The polar pattern results in accurate pickup of round-table discussions without degradation. A mini XLR output connector is located on the rear and a 30-foot mini XLR to standard XLR output cable is supplied. The CM11B is powered with a 9 to 52V phantom power source. The heavy duty construction features a die-cast reinforced grille to protect against damage due to shock.
AT A Glance
- Omnidirectional Polar Pattern
- The omnidirectional polar pattern provides a generous pickup area around the perimeter, allowing accurate signal reproduction at all directions.
- Sleek Low Profile
- The low profile and black matte finish enable the CM10B to be easily concealed in broadcast and performance applications.
- Wide Linear Frequency Response
- The wide linear frequency response provides accurate detail and clarity while maintaining a low noise floor.
- Heavy Duty Construction
- The heavy duty reinforced grille protects against sudden shock and abuse.
| Weight | 2.20462 lbs |
|---|---|
| Dimensions | 15 × 15 × 15 in |
| Brands |
Samson CM11BĀ Specs
| Transducer | Fixed-Charge Condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 30Hz to 18kHz |
| Dynamic Range (Typical) | 103dB |
| Signal-to-Noise Ratio | 70dB |
| Maximum Input Sound Level | 127dB |
| Power Requirements | 9 ~ 52V Phantom Power |
| Output Impedance | 600 ohms |
| Output Connectors | 3-pin XLR Type |
| Pad | No |
| Low Frequency Roll-Off | No |
| Dimensions | 0.94 x 3.31″ (24 x 84mm) (Height x Diameter) |
| Weight | not specified by manufacturer |
In The Box
- Samson CM11B Omnidirectional Boundary Microphone
- 30-Foot Mini to XLR Cable
Based on 0 reviews
Be the first to review “Samson CM11B Omnidirectional Boundary Microphone”
Related products
-
Proaudio, Dynamic Microphones, Microphones, Shure
Shure BETA 58A – Dynamic Microphone
SKU: BETA 58A
TheĀ Shure Beta 58AĀ is a handheld supercardioid dynamic microphone offering enhanced midrange and controlled proximity effect for optimal reproduction of vocals, speech, and instruments in concerts, public address, houses of worship, and live stage applications
Key Features
- Supercardioid Polar Pattern
- Dynamic Element with Neodymium Magnet
- High-Output Electronics
- 50 Hz to 16 kHz Frequency Response
- Neodymium magnet for high signalātoānoise output
- Hardened steel mesh grille that resists wear and abuse
- Minimally effected by varying load impedance
- Legendary Shure quality and reliability
SKU: BETA 58A -
Proaudio, Condenser Microphones, Microphones, RODE Microphones
RODE NT1-A Large-Diaphragm Cardioid Condenser Microphone – Silver
Proaudio, Condenser Microphones, Microphones, RODE MicrophonesRODE NT1-A Large-Diaphragm Cardioid Condenser Microphone – Silver
SKU: NT1-A
Combining a true condenser capsule and ultralow-noise circuitry, theĀ Rode NT1-AĀ large-diaphragm studio microphone offers a warm, clear, and quiet sonic signature that makes it popular for voice and instrument capture at home or in the studio.
Key Features- For Vocals, Podcasts, and Instruments
- Cardioid Pattern Reduces Ambient Noise
- Ultralow Self-Noise of 5 dBA
- Internally Shock-Mounted Capsule
- Shockmount Inhibits Vibration Noise
- Large 1″ Gold-Sputtered Diaphragm
- Transformerless Output Stage
- Pop Filter Controls Vocal Plosives
- XLR Cable for Hookup to Mic Preamp
- Operates on 24 or 48 VDC Phantom Power
SKU: NT1-A -
Proaudio, Behringer, Conference Microphone, Microphones, Wireless Microphone
Behringer ULM300MIC Handheld Single Channel Microphone System
Proaudio, Behringer, Conference Microphone, Microphones, Wireless MicrophoneBehringer ULM300MIC Handheld Single Channel Microphone System
SKU: ULM300MICTheĀ Behringer ULTRALINK ULM300MICĀ is a 2.4 GHz wireless microphone system designed to provide out-of-the-box functionality and voice-optimized performance for DJs, vocalists, presenters, and public speakers in clubs, concert venues, conferences, and live stage applications.Key Features
- For Presenters and Performers
- 1 Handheld Mic
- Single-Channel Tabletop Receiver
- Automatic Pairing
- Volume & Mute Controls on Mic
- Balanced XLR 3-Pin Output
- Unbalanced 1/4″ TS Output
- LED Indicators for Signal and Status
- 24 Hours on Two AA Batteries
- Not Expandable, Maximum Range of 200′
SKU: ULM300MIC -
Proaudio, Behringer, Condenser Microphones, Microphones
Behringer C-1 Studio Condenser Microphone
The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection.
Key Features
- Condenser Element
- Cardioid Pattern
- Wide Frequency Response
- Mic Case Included
SKU: C-1 -
Proaudio, Condenser Microphones, Microphones, MXl Mic
MXL 440 Studio Condenser Microphone
The black with gold print 440 Studio Condenser Microphone from MXL features a gold sputtered large diaphragm, suitable for a wide variety of applications.
Key Features
- Gold-Sputtered Diaphragm
- Cardioid Pickup Pattern
- FET Preamp
- Electrically-Balanced Output
SKU: 440
There are no reviews yet.