Behringer XENYX QX2442USB 24-Channel USB Mixer with Multi-FX Processor
In stock
The Behringer XENYX QX2442USB is a versatile 24-channel mixer equally well suited for sound-reinforcement applications and project recording studios.
Key Features
- 24-Channel mixer with 60 mm faders
- 10 Microphone inputs with 48 V phantom power and 75 Hz low cut
- Compressor on each microphone channel
- Internal Klark Teknik multi effect device
- Built-In USB sound card
- 4 Stereo inputs
- Complete 3-band EQ with semi-parametric mid-band
- 4 AUX (pre/post)
- Insert per channel
- Peak LED per channel
- Mute per channel
- 2 Track In/Out
- XLR main out
- 4 Subgroups with separate outputs
Call for Price
CompareBehringer XENYX QX2442USB Overview
The Behringer XENYX QX2442USB is a versatile 24-channel mixer equally well suited for sound-reinforcement applications and project recording studios. It employs ten, high-quality XENYX mic preamps to deliver a clear and natural sound with 130 dB of dynamic range, low distortion, and a wide frequency response extending from 10 Hz to 200 kHz.
Tone correction
Behringer XENYX QX2442USB has British-style, 3-band EQs provide warm and musical tone corrections for your vocals and instruments, while easy-to-use, “one-knob” compressors gently smooth out signal peaks for punchy and present bass lines, drums, and vocals that sit right in the mix.
Packed with powerful features:
The XENYX QX2442USB Mixer is packed with powerful features for getting the job done no matter the situation. Should your singer prefer the convenience of performing without a mic cable, the mixer is wireless-ready with a USB jack on the top panel for connecting the Behringer ULM digital wireless microphone system (available separately).
Key Features
- 10 high-quality, phantom-powered XENYX mic preamps for dynamic and condenser microphones
- 130 dB of dynamic range for high headroom
- Low-noise and low-distortion circuitry
- 8 studio-grade compressors with super-easy “one-knob” functionality and control LED
- Legendary Klark Teknik FX processor with LCD Dislplay, dual-parameters, Tap function, and storable user parameter settings
- 100 FX presets include reverbs, delays, modulation, and multi-effects
- Wireless-ready for Behringer ULM digital wireless microphone system (available separately)
- Built-in stereo USB audio interface to connect directly to your computer
- Free audio recording, editing, and podcasting software, plus 150 instruments/effect plug-ins downloadable at behringer.com
- Neo-classic, British-style 3-band EQs with the semi-parametric mid band for warm and musical sound
- Channel inserts and direct outputs on each mono channel plus main mix inserts for flexible connection of outboard equipment
- 4 aux sends per channel: 2 pre-/post-faders and switchable for monitoring/FX applications, 2 post-faders for internal FX processor or as send to external FX processor
- Clip LEDs, mute, main mix, and subgroup routing switches, solo, and PFL functions on all channels
- 4 subgroups with separate outputs for added routing flexibility
- 4 multi-functional stereo aux returns with flexible routing
- Control room/phones outputs with multi-input source matrix—record inputs assignable to main mix or control room/phones outputs
- Long-wearing 60mm logarithmic-taper faders and sealed rotary controls
- Lamp socket to connect a gooseneck lamp
- “Planet Earth” switching power supply for maximum flexibility (100-240 V), noise-free audio, superior transient response, and low power consumption for energy saving
- Designed and engineered in Germany
| Weight | 16.4 lbs |
|---|---|
| Dimensions | 21 × 20.3 × 8.3 in |
| Brands |
Behringer QX2442USB Specs
| Microphone Inputs | 10 x XLR, balanced, discrete input circuit
XENYX microphone preamps with 48 V phantom power (switchable) |
| Microphone EIN | (EIN 20 Hz to 20 kHz)
At 0 Ohm Source Resistance: -134 dB / -136 dB A-weighted Frequency Response: <10 Hz to 150 kHz (-1 dB) Gain Range: +10 to +60 dB Maximum Input Level: +12 dBu at +10 dB gain Impedance: 2 kOhms, balanced Signal-to-Noise Ratio: 108 dB / 110 dB A-weighted (0 dBu In at +22 dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted |
| Line Inputs | 8 x 1/4″ / 6.3 mm TRS, balanced
Impedance: 20 kOhms balanced / 10 kOhms unbalanced Gain Range: -10 to +40 dB Maximum Input Level: 30 dBu |
| Frequency Response | Microphone Input to Main Out: <10 Hz to 160 kHz (±3 dB) |
| Stereo Line Inputs | 4 x pairs of 1/4″ / 6.3 mm TRS, balanced
Impedance: 20 kOhms balanced / 10 kOhms unbalanced Gain Range: -20 dB to +20 dB Maximum Input Level: +22 dBu |
| 2-Track I/O | Input: 1 x pair RCA, stereo, unbalanced CD/tape inputs Impedance: 10 kOhms Maximum Input Level: +22 dBuOutput: 1 x pair RCA, stereo, unbalanced tape outputs |
| Equalization | Mono Channels: 3-band, semi-parametric EQs Low: 80 Hz (±15 dB) Mid: Variable 100 Hz to 8 kHz (±15 dB) High: 12 kHz (±15 dB)Stereo Channels: 4-band, fixed Low: 80 Hz (±15 dB) Low Mid: 500 Hz (±15 dB) High Mid: 3 kHz (±15 dB) High: 12 kHz (±15 dB) |
| Channel Inserts | 8 x 1/4″ / 6.3 mm TRS, unbalanced (on mono channels)
Maximum Input Level: +22 dBu |
| AUX Sends | 4 x 1/4″ / 6.3 mm TRS, unbalanced
Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| AUX Returns | 4 x pairs of 1/4″ / 6.3 mm TRS, balanced
Impedance: 20 kOhms, balanced, 10 kOhms unbalanced Maximum Input Level: +22 dBu |
| Main Outputs | 2 x XLR and 2 x 1/4″ / 6.3 mm TRS, balanced
Impedance: 240 Ohms balanced, 120 Ohms unbalanced Maximum Output Level: +28 dBu |
| Control Room Outputs | 2 x 1/4″ / 6.3 mm TRS, balanced
Impedance: 120 Ohms (approximately) Maximum Output Level: +22 dBu |
| Headphone Output | 2 x 1/4″ / 6.3 mm TRS, stereo, unbalanced
Impedance: 25 Ohms Maximum Output Level: +21 dBu, 150 Ohms (+25 dBm) |
| DSP | Type: Klark Teknik
Converter: 24-bit Sigma-Delta Sample Rate: 40 kHz |
| USB Interface | Connector: USB Type-B
Audio: Stereo I/O Converter: 16-bit Sample Rate: 48 kHz |
| Wireless Access Point | USB Dongle: Accepts signals from 2 x independent Behringer ULM mics |
| Noise | Main Mix at -∞, Channel Fader at -∞: -102 dB / -105 dB A-weighted
Main Mix at 0 dB, Channel Fader at -∞: -85 dB / -88 dB A-weighted Main Mix at 0 dB, Channel Fader at 0 dB: -77 dB / -79 dB A-weighted |
| Power | Mains Voltage: 100-240 V, 50/60 Hz
Power Consumption: 50 W Fuse: T 1.6 Ah, 250 V Mains Connectors: IEC receptacle |
| Dimensions (W x D x H) | 17.5 x 17.3 x 5.5″ / 445 x 440 x 140 mm |
| Weight | 12.6 lb / 5.7 kg |
| Package Weight | 16.4 lb |
| Box Dimensions (LxWxH) | 21 x 20.3 x 8.3″ |
Based on 0 reviews
Be the first to review “Behringer XENYX QX2442USB 24-Channel USB Mixer with Multi-FX Processor”
Related products
-
Proaudio, Mixers and Recorders, Zoom audio
Zoom G2.1Nu Guitar Multi Effects Pedal
Key Features
- Effect Types: 83
- Effect Modules: 9
- Patch Memory: User 100 + Preset 100, Total 200
- Sampling Frequency: 96kHz
- A/D Conversion: 24bit, 64times over-sampling
- D/A Conversion: 24bit, 64times over-sampling
- Signal Processing: 32bit
SKU: ZG21nU -
Proaudio, Mixers and Recorders, pro cameras, Professional videos, Recorders, Zoom audio
Zoom Q2n 4K Handy Video Recorder
Proaudio, Mixers and Recorders, pro cameras, Professional videos, Recorders, Zoom audioZoom Q2n 4K Handy Video Recorder
Designed for musicians, the Zoom Q2n 4K Handy Video Recorder pairs high-resolution UHD 4K video capture with up to 24-bit/96 kHz audio recording. Five FOV (field-of-view) settings and one-button recording enable you to easily capture yourself and/or your bandmates, whether for disseminating to your social media accounts or for reviewing a rehearsal or performance.
Key Features
- Up to 4K at 30 fps or 1080p60 Video
- 1/2.3″ CMOS Sensor
- 150° f/2.8 Wide-Angle Lens
- 5 x Wide to Tele Field-of-View Settings
- Stereo X/Y Condenser Mics, up to 120 dB
- HDR & 12 Presets for Optimal Exposure
- Standalone 24-bit/96 kHz WAV Recording
- Live Streaming, Audio Stream via iOS
- Stereo Mini-Jack Audio Input
- Uses 2 x AA Batteries or USB Power Bank
SKU: Q2n-4K -
Proaudio, Live Sound, Mixer, Mixers and Recorders, Power Mixers
Dynacord PowerMate 1000-3 10‑Channel Power Mixer
Proaudio, Live Sound, Mixer, Mixers and Recorders, Power MixersDynacord PowerMate 1000-3 10‑Channel Power Mixer
The Dynacord PowerMate 1000-3 10-Channel Powered Mixer features six mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs.
Key Features
- Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line)
- Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
- 2 High-Quality editable effects, 100 factory and 20 user presets
- Professional 4×4 24-bit / 96 kHz USB interface with MIDI
- Lightweight (14 kg) road-ready package with extra robust cover-lid
SKU: DC-PM1000-3-UNIV -
Proaudio, Mixers and Recorders, Recorders, Zoom audio
Zoom H1n Portable Recorder Onboard Stereo Microphones With SD Card
Proaudio, Mixers and Recorders, Recorders, Zoom audioZoom H1n Portable Recorder Onboard Stereo Microphones With SD Card
An ideal fit for solo musicians and podcasters, as well as a terrific entry point into the world of audio for video and sound design, the black Zoom H1n portable recorder features an onboard stereo microphone that lets you easily record two tracks of high-resolution audio in the palm of your hand.
Key Features
- Speech, Sound Effects & Music Recording
- Onboard Stereo Mic, Built-In Speaker
- 3.5mm Mic/Line Input with Plug-In Power
- Simple Layout of Common Controls
- Records in WAV up to 96 kHz
- 3.5mm Line/Headphone Output
- Auto-Record & Pre-Record Functions
- Battery Life up to 10 Hours
- Supports microSDHC Cards up to 32GB
- Auto-Level, Limiter & Low-Cut Filter
SKU: ZH1N
There are no reviews yet.