, , ,

Behringer XENYX 1002FX 10 Channel Audio Mixer with Effects Processor

BEHRINGER
Availability:

Out of stock
Key Features
  • 2 x XENYX Mic Preamps, 48 V Phantom
  • 4 x Stereo Line Inputs
  • 24-Bit, Dual-Engine Multi-FX Processor
  • 130 dB of Dynamic Range
  • Warm, British-Style 3-Band EQs
  • FX Send for Each Channel
  • Main Mix and Control Room Outputs
  • Phones Out and Stereo CD/Tape I/O
  • 60mm Master Fader
  • Compact Design & Sealed Rotary Controls

₨ 25,000

Out of stock

Behringer XENYX 1002FX 10 Channel Audio Mixer with Effects Processor

The Behringer XENYX 1002FX 10 Channel Audio Mixer with Effects Processor is a mixer that offers clear and natural sound in a small and portable format. With ten inputs, two high-quality XENYX mic preamps, a 60mm logarithmic-taper master fader, and a multi-FX processor, this versatile mixer is ideal for a wide variety of mix and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.

XENYX mic preamps

The XENYX  is quick to set up and operate with all connections and controls easily reachable on the top of the unit. The first two input channels feature XENYX mic preamps on two XLR connectors, as well as two 1/4″ inputs for line-level signals. Switchable, onboard 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. A gain knob lets you adjust the input level and a clip LED alerts you if you are overdriving the input. British-style 3-band EQs provide warm and musical tone corrections for your vocals and instruments.

stereo inputs

The four sets of stereo inputs each feature +4/-10 switches used to match the mixer’s input sensitivity to the incoming signal. This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels.

multi-FX processor

The built-in, dual-engine multi-FX processor offers 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and a variety of multi-effects. Each channel is equipped with a post-fader FX send, which you can use to send signal to the FX processor or to an external processor. The FX-to-Main knob allows you to control the level of the effect in your main mix.

 

Key Features
  • Compact and versatile 10-channel analog mixer for small-stage gigs or mid-size corporate events
  • Two quality XENYX microphone preamps with 130 dB of dynamic range
  • Switchable 48V phantom power
  • Two balanced mono line inputs
  • Four balanced stereo pairs of line inputs
  • 24-bit, dual-engine multi-FX processor with 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and more
  • Neo-classic, British-style 3-band EQs for warm and musical sound
  • One mono post-fader FX-send knob per channel for internal FX processor and/or as send to external processor
  • Main mix outputs and separate control room, phones, and stereo 2-Track outputs
  • 2-Track inputs assignable to main mix or control room/phones outputs
  • Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
  • Long-wearing 60mm logarithmic-taper master fader
  • Designed and engineered in Germany
SKU: 1002FX Categories: , , , Tags: , , , , , , , , , , ,
Weight 4.85 lbs
Dimensions 13.2 × 10.5 × 4.1 in
Brands

Behringer 1002FX Specs

Microphone Inputs 2 x XLR, electronically balanced, discrete input circuit

XENYX microphone preamps with 48 V phantom power (switchable)
Microphone EIN (EIN 20 Hz to 20 kHz)

At 0 Ohm Source Resistance: -132.7 dB / 137 dB A-weighted
At 50 Ohms Source Resistance: -130 dB / 133.9 dB A-weighted
At 150 Ohms Source Resistance: -127.1 dB / 130.9 dB A-weighted

Frequency Response: <10 Hz to 200 kHz (-1 dB)

Gain Range: +10 to +60 dB

Maximum Input Level: +12 dBu at +10 dB gain

Impedance: 2.6 kOhms, approximately

Signal-to-Noise Ratio: -107 dB / -111 dB A-weighted (0 dBu In at +22 dB gain)

Distortion (THD+N): 0.005% / 0.003% A-weighted
Line Inputs 2 x 1/4″ / 6.3 mm TRS, electronically balanced

Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately)

Gain Range: -10 to +40 dB

Maximum Input Level: +20 dBu at 0 dB gain
Fade-Out/Crosstalk Attenuation Main Fader Closed: 85 dB

Channel Fader Closed: 88 dB
Frequency Response Microphone Input to Main Out:
<10 Hz to 80 kHz (+0 db/-1 dB)
<10 Hz to 137 kHz (+0 db/-3 dB)
Stereo Line Inputs 4 x pairs of 1/4″ / 6.3 mm TRS, electronically balanced

Impedance: 20 kOhms balanced / 10 kOhms unbalanced (approximately, +4 dBu operating level)

Maximum Input Level: +22 dBu
Equalization (EQ mono channels)

Low: 80 Hz (±15 dB)
Mid: 2.5 kHz (±15 dB)
High: 12 kHz (±15 dB)
FX Send 1 x 1/4″ / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu
Main Outputs 2 x 1/4″ / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu
Control Room Outputs 2 x 1/4″ / 6.3 mm TRS, unbalanced

Impedance: 120 Ohms (approximately)

Maximum Output Level: +22 dBu
Headphone Output 1 x 1/4″ / 6.3 mm TRS, stereo, unbalanced

Impedance: 150 Ohms (+25 dBm)

Maximum Output Level: +19 dBu
Tape I/O 1 x pair RCA, stereo, unbalanced CD/tape inputs

1 x pair RCA, stereo, unbalanced tape outputs
Noise Main Mix at -∞, Channel Fader at -∞: -105 dB / -108 dB A-weighted

Main Mix at 0 dB, Channel Fader at -∞: -94 dB / -97 dB A-weighted

Main Mix at 0 dB, Channel Fader at 0 dB: -83 dB / -85 dB A-weighted
FX Section Converter: 24-bit Sigma-Delta

Sampling Rate: 40 kHz
AC Adapter Input: 120 V, 60 Hz

Output: 2 x 14.8 V, 2 x 500 mA
Dimensions (H x W x D) 1.9 x 7.4 x 8.7″ / 47 x 189 x 220 mm
Weight 3.5 lb / 1.6 kg (approximately)
Packaging Info
Package Weight 4.85 lb
Box Dimensions (LxWxH) 13.2 x 10.5 x 4.1″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Behringer XENYX 1002FX 10 Channel Audio Mixer with Effects Processor”

There are no reviews yet.

Related products