, ,

PreSonus Eris E5 Two-Way Active 5.25 inch Studio Monitor (Each)

Availability:

Out of stock


SKU: ERISE5

The Eris E5 Two-Way Active 5.25″ Studio Monitor from PreSonus delivers an accurate response with tight bass and a clear upper end.

Key Features

  • 5.25″ Kevlar Woofer and 1″ Tweeter
  • 70W Class AB Biamplification
  • 102dB Max SPL
  • Resonance-Suppressing Internal Bracing
  • Acoustic Tuning Controls
  • Acoustic Space Settings
  • Accepts XLR, 1/4″ TRS and RCA Inputs
  • Output Current and Overheat Protection

 57,000

Out of stock

PreSonus Eris E5 Studio Monitor

The PreSonus Eris E5 5 25 Studio Monitor from PreSonus delivers an accurate response with tight bass and a clear upper end. The Kevlar low frequency transducers, low-mass silk-dome tweeters and responsive Class AB amplification combine with acoustic-adjustment controls to create a versatile and adaptable listening system.

These monitors each feature a 5.25″ Kevlar woofer and a 1″ tweeter. Their class-AB amplifiers provide a combined output of up to 140W, while each monitor can handle up to 102 dB SPL.

The Eris E5s provide a number of input options including XLR, TRS, and RCA, allowing them to be integrated into a variety of systems. Each monitor features three EQ controls, allowing you to tune them to your environment for optimal performance.

Acoustic Tuning Controling

The Eris provides three EQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors to your space. The Low control also is useful when using the E5 with a subwoofer.

The High control is a shelving filter that boosts or cuts all frequencies above 4.5kHz by as much as 6dB. The Mid control is a mid-frequency peak filter that boosts or cuts frequencies centered at 1kHz and extending about one octave above and below that frequency.

The Low Cutoff control rolls off frequencies below either 80 or 100Hz at a slope of 12dB/octave. This control is especially useful if you also have a connected subwoofer.

Acoustic Space Controling

A three-position Acoustic Space switch controls a second-order, low shelving filter that cuts frequencies below 800 Hz by either 2 or 4dB to compensate for the boundary bass boost that occurs in close proximity to walls or corners.

Thorough Protection Circuitry

RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Eris monitors also provide overheat protection, current-output limiting and subsonic protection. “Soft startup” amplifiers prevent damaging pops from sounding through the speakers when you power them up.
Weight 11.8 lbs
Dimensions 13.1 × 11.6 × 9.9 in
BRAND Presonus
INPUTS 1 x XLR balanced
1 x 1/4″ TRS balanced
1 x RCA phono unbalanced
FREQUENCY RESPONSE 53 Hz to 22 kHz
CROSSOVER FREQUENCY 3 kHz
LF AMPLIFIER 45W
HF AMPLIFIER 35W
MAXIMUM SPL 102 dB @ 1 meter
LOW FREQUENCY DRIVER 5.25″ (13.34 cm) Kevlar
HIGH FREQUENCY DRIVER 1″ (2.54 cm) silk dome
INPUT IMPEDANCE 10kΩ
VOLUME CONTROL A-type taper
EQUALIZATION HF Control: -6, 0, +6 dB; continuously variable
MF Control: -6, 0, +6 dB; continuously variable
Low Cut Filter: Flat, 80 Hz, 100 Hz; switchable
Acoustic Space Control: Flat, -2 dB, -4 dB; switchable
PROTECTION RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
ENCLOSURE MATERIAL Vinyl-laminated MDF
POWER REQUIREMENTS 100 to 120V or 220 to 240V, 50/60 Hz
DIMENSIONS (W X D X H) 7 x 7.68 x 10.24″ (178 x 195 x 260 mm)
WEIGHT 10.2 lb (4.63 kg)
PACKAGING INFO
PACKAGE WEIGHT 11.8 lb
BOX DIMENSIONS (LXWXH) 13.1 x 11.6 x 9.9″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PreSonus Eris E5 Two-Way Active 5.25 inch Studio Monitor (Each)”

There are no reviews yet.