, , ,

Behringer EUROCOM SPL3220 Multiband Dynamic Stereo Sound Processor

BEHRINGER
Availability:

In stock


SKU: SPL3220

The Behringer EUROCOM SPL3220 Stereo Multiband Sound Processor provides dependable, seamless full-loudness control without sacrificing the sonic integrity of the sound system, or listening pleasure of the audience.

Key Features
  • Limiter
  • Loudness Maximizer
  • 8-segment input/output level
  • Two balanced/unbalanced input

 45,000

In stock

Behringer EUROCOM SPL3220 Stereo Multiband Sound Processor

The Behringer EUROCOM SPL3220 Stereo Multiband Sound Processor provides dependable, seamless full-loudness control without sacrificing the sonic integrity of the sound system, or listening pleasure of the audience.

multiband IGC (Interactive Gain Control) and IKA (Interactive Knee Adaptation)

Thanks to onboard, multiband IGC (Interactive Gain Control) and IKA (Interactive Knee Adaptation) compression, the SPL3220 allows you to apply processing with surgical precision for maximum punch and intelligibility, without the audible artifacts associated with traditional broadband dynamics processors. Additionally, the SPL3220 can be used for mix leveling and maximizing signal density at low volumes, where perceived loudness becomes even more important. Add to this the ability to enhance speech intelligibility and provide enhanced loudspeaker protection, while preserving dynamic range and the EUROCOM SPL3220 becomes an essential part of your audio engineer’s toolkit.

versatility

The professional XLR/TRS combination and Euroblock connectors provide versatility, thereby allowing the SPL3220 to be inserted in-line prior to house amplification, irrespective of the configuration. Built-in hard-bypass relays ensure system protection and signal continuity in the event of a power failure or accidental disconnect. High-accuracy I/O Level and Gain Reduction meters plus an elegant, intuitive control panel make optimal system setup fast and easy.

Features:

  • Professional multiband sound processor for public address, broadcasting, and mastering applications
  • Multiband technology provides for optimal and lively audio processing without audible pumping artifacts
  • Loudness maximization to achieve improved signal density for public address and competitive broadcast sound
  • Leveler automatically adjusts the signal density for harmonized loudness and enhanced listening experience
  • Protects speaker systems that are submitted to continuous operation at maximum SPL
  • Controls the maximum allowable sound pressure level in public musical environments such as discotheques, pubs, etc.
  • Speech enhancer to dramatically increase speech intelligibility for PA applications such as airports and emergency announcement systems
  • IKA (Interactive Knee Adaptation) compressor features inaudible compression and prevents pumping due to low-frequency signals
  • IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program limiter for reliable and inaudible protection against signal peaks
  • Accurate, 8-segment input/output level and gain reduction meter
  • True stereo operation through RMS energy summing for enhanced stereo imaging
  • Complies with certain regulations – the unit can be sealed to avoid unauthorized changes to settings
  • Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
  • Operating level switchable from +4 dBu to -10 dBV
  • Hinged front door panel covers the control surface plus the power switch
  • Rack ear screw covers, IEC-type AC power cord, and all mating Euroblock connectors included
  • Light, low noise, and efficient switch-mode power supply for noise-free audio, efficient transient response, and low power consumption
  • High-quality components and rugged construction ensure long life
Weight 6.7 lbs
Dimensions 20.9 × 12 × 1.2 in
Brands

Behringer SPL3220 Specs

Audio Input
Type RF filtered, servo-balanced input
Impedance 60 KΩ
Nominal Operating Level -10 dBV to 4 dBu
Maximum Input Level 20 dBu balanced and unbalanced
CMR >40 dB at 1 kHz
Audio Output
Type Electronically servo-balanced output stage (optional transformer-balanced). Automatic level correction for unbalanced use (correction: 6 dB)
Impedance
Maximum Input Level 26 dBm balanced
20 dBm unbalanced
Bandwidth 5 Hz to 100 kHz, +0, -3 dB
THD 0.02% typical at 4 dBu
0.1% typical at 20 dBu
IMD 0.01% typical (SMPTE) at 10 dBu
Hum & Noise >-93 dBu (20 Hz to 20 kHz, unweighted) at unity gain
Crosstalk >-85 dBu at 20 kHz
CMR >40 dB at 1 kHz
Crossover
Type 24 dB Butterworth filter
Frequencies Corner Frequencies: Switchable (500 Hz / 2 kHz)
Compressor
Type Multiband IKA (Interactive Knee Adaptation) Compressor
Controls THRESHOLD: Variable (-40 to 20 dBu)
LEVELLER: Variable (Off to 6)
RATIO: Variable (1:1 bis 6:1)
OUTPUT: Variable (-20 bis +20 dB)
Peak Limiter Section
Type Multiband IGC (Interactive Gain Control) Peak Limiter
Level Control Variable (0 to 20 dBu)
LED Band Limit LEDs: Indicators for LOW and HIGH BAND limiter operation
Switches
In/Out DC controlled hard -bypass relay
Indicators
Gain Reduction 8-Element Level Meters: 1/2/4/6/10/15/20/30 dB
In/Out 8-Element Level Meters: -30/-20/-10/-5/0/+5/+10/+15 dBu
LED Indicator For each function switch
Power Supply
Voltage 100 to 240 VAC, 50 to 60 Hz
Power Consumption 10 W
Mains Standard IEC receptacle
Physical
Dimensions 1.7 x 19.0 x 7.6″ (44.4 x 482.6 x 193.0 mm)
Weight 6.6 lb (3.0 kg)
Packaging Info
Package Weight 6.7 lb
Box Dimensions (LxWxH) 20.9 x 12 x 4.2″

In the Box

  • Behringer EUROCOM SPL3220 Stereo Multiband Sound Processor
  • Rack Ear Screw Covers
  • IEC-Type AC Power Cord
  • Mating Euroblock Connectors

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Behringer EUROCOM SPL3220 Multiband Dynamic Stereo Sound Processor”

There are no reviews yet.