, , ,

Focusrite Clarett+ 2Pre – 10×4 USB Type-C Bus-Powered Audio Interface for Music Production

FOCUSRITE
Availability:

In stock


SKU: CLARETT-PLUS-2PRE

Key Features

  • USB Type-C and Type-A Connectivity
  • 2 Mic, Line and Instrument Preamps
  • 1 Headphone Out, 4 Line Outputs
  • Upgraded 24-Bit / 192 kHz Conversion
  • AC or Bus Powered / Mac and Windows
  • Phantom Power, MIDI I/O
  • Mic Air Mode, Bicolor Gain Halos
  • ADAT Port for Input Expansion

 165,000

In stock

Compare

Focusrite Clarett+ 2Pre Overview

Focusrite Clarett+ 2Pre USB Type-C audio interface combines upgraded 24-bit / 192 kHz AD/DA conversion with low-latency monitoring and two Air-enabled microphone preamps that can model the sound of the company’s classic ISA preamps. With low noise (-129 dB EIN), massive dynamic range, and even less distortion than before, the high-performance mic preamps deliver a clean, open, and transparent sound, for accurate reproduction of the original performance.

Compatible For Every OS Device

Clarett+ 2Pre Features two mic,line and instrument inputs, the interface offers an optical port for digital input expansion via ADAT or S/PDIF and MIDI I/O for integration of MIDI equipment such as a keyboard or drum machine. Four line-level outputs and a stereo headphone out let you properly hook up monitors, headphones, and more.

Updated and New Features

Independent A/D and D/A converters bring you closer than ever to your music and let you hear the truth, whether you’re in the studio or on the road. Greatly improved D/A dynamic range enables you to hear every detail and have greater control over your mix. Lower A/D converter distortion lets you capture signals with more clarity, for greater transparency and sonic accuracy.

High-Resolution Conversion

Capture more detail than ever before: The carefully engineered design means Clarett+ 2Pre gives you stunning results. At a class-leading 124 dB dynamic range, the ultralow-noise 24-bit / 192 kHz converters give your recordings clarity and nuance.

Independent Headphone and Line Outputs

There are four balanced 1/4″ TRS line outputs on the rear panel: The first two are configurable to function as monitor outputs or traditional line-level outs. To allow critical listening through headphones, there is a front-panel 1/4″ headphone jack fed by a powerful and tonally linear headphone amp. Separate knobs are provided for quick and independent adjustment of the monitor and headphone volumes.

8-Channel Digital Input

In addition to having flexible analog inputs and outputs, the Clarett+ 2Pre offers a TOSLINK optical input, which can accept an 8-channel ADAT input at up to 48 kHz (four channels at 88.2 / 96 kHz) or a stereo S/PDIF source. Connect any external microphone preamp equipped with an ADAT or S/PDIF output to this optical input to record additional microphones.

Weight4.085 lbs
Dimensions10.6 × 10.2 × 4.5 in
Brands

Focusrite Clarett+ 2Pre Specs

Key Specs
Form Factor
Desktop
Channels of I/O
Analog:
2 Inputs / 4 Outputs
Digital:
8 Inputs / 0 Outputs
Maximum Sampling Rate
192 kHz / 24-Bit
Number of Microphone Preamps
2 Preamps
Analog Audio I/O
2 x Combo XLR-1/4″ TRS Balanced/Unbalanced Mic/Line/Hi-Z Input (Front Panel)
4 x 1/4″ TRS Balanced Line/Monitor Output
1 x 1/4″ TRS Unbalanced Headphone Output (Front Panel)
Digital Audio I/O
1 x TOSLINK Optical ADAT Input (S/MUX Support)
Host Connection
1 x USB-C
OS Compatibility
macOS 10.11 or Later
macOS 11
Windows 7 or Later
*As of November, 2021: Check with manufacturer for the most up-to-date compatibility
Power Requirements
AC/DC Power Adapter (Included) or USB Bus Power
Display
None
Channels of I/O
Analog:
2 Inputs / 4 Outputs
Digital:
8 Inputs / 0 Outputs
Maximum Sampling Rate
192 kHz / 24-Bit
Number of Microphone Preamps
2 Preamps
Input Level Adjustment
2 x Knob
Expansion Slots
None
Signal Processing
Pad
None
Gain/Trim Range
Mic/Line/Hi-Z Inputs:
+57 dB
High-Pass Filter
None
Solo/Mute
None
Connectivity
Analog Audio I/O
2 x Combo XLR-1/4″ TRS Balanced/Unbalanced Mic/Line/Hi-Z Input (Front Panel)
4 x 1/4″ TRS Balanced Line/Monitor Output
1 x 1/4″ TRS Unbalanced Headphone Output (Front Panel)
Phantom Power
48 V, Selectable On/Off (Selectable on Individual Inputs)
Digital Audio I/O
1 x TOSLINK Optical ADAT Input (S/MUX Support)
Host Connection
1 x USB-C
Host Connection Protocol
USB 2.0
USB (Non-Host)
None
Sync I/O
None
Network I/O
None
MIDI I/O
1 x DIN 5-Pin Input
1 x DIN 5-Pin Output
Performance
Frequency Response
Mic Inputs:
20 Hz to 20 kHz ±0.03 dB
20 Hz to 35 kHz ±0.15 dB
Line Inputs:
20 Hz to 20 kHz ±0.05 dB
20 Hz to 35 kHz ±0.15 dB
Hi-Z Inputs:
20 Hz to 20 kHz ±0.04 dB
20 Hz to 35 kHz ±0.15 dB
Line, Monitor Outputs:
20 Hz to 20 kHz ±0.02 dB
20 Hz to 35 kHz ±0.02 dB
Headphone Outputs:
20 Hz to 20 kHz ±0.06 dB
20 Hz to 35 kHz ±0.07 dB
Maximum Input Level
Mic Inputs:
+18 dBu
Line Inputs:
+26 dBu
Hi-Z Inputs:
+15 dBu
Maximum Output Level
Line/Monitor Outputs:
+18 dBu
Headphone Outputs:
+16 dBu
Impedance
Inputs:
2.2 Kilohms
Dynamic Range
Mic Inputs:
118 dB (Min Gain)
Line Inputs:
118 dB (Min Gain)
Hi-Z Inputs:
116 dB
Line/Monitor Outputs:
124 dB
Headphone Outputs:
> 118 dB
THD+N
Mic Inputs:
-110 dB (+20 dB Input, at -1 dBFS)
Line Inputs:
-100 dB (Min Gain, at -1 dBFS)
Hi-Z Inputs:
-96.5 dB (Min Gain, at -1 dBFS)
Line/Monitor Outputs:
-106 dB
Headphone Outputs:
-104 dB
EIN
Mic Inputs:
< -129 dBu
Digital Audio
Sample Rates
44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
Sample Rate Conversion
None
Bit Depths
24-Bit (AD/DA Conversion)
Sync Sources
ADAT, Internal, S/PDIF
Audio Storage & Playback
Memory Card Slot
None
Compatibility
OS Compatibility
macOS 10.11 or Later
macOS 11
Windows 7 or Later
*As of November, 2021: Check with manufacturer for the most up-to-date compatibility
Included Software
None
Compatible Software (Not Included)
Any Core Audio (Mac) Compliant Software
Included Plug-Ins
Preamp & Channel Strip:
Brainworx bx_console Focusrite SC
Dynamics:
Focusrite Red 3 Compressor
Equalization:
Focusrite Red 2 Equalizer
Supported Drivers/API & Plug-Ins
Proprietary
Mobile Device Compatibility
None
Required Hardware
Available USB 2.0 Port, USB 3.0 / 3.1/3.2 Gen 1 Port, or USB-C Port
USB Cable (Included)
Internet Connection
Required for Registration, Software/Driver Download
Power
Power Requirements
AC/DC Power Adapter (Included) or USB Bus Power
AC/DC Power Adapter
12 VDC at 1.5 A, Center-Positive (Included)
Physical
Anti-Theft Features
Kensington Security Slot
Dimensions
8.27 x 6.34 x 2.17″ / 21.01 x 16.1 x 5.51 cm
Weight
3.0 lb / 1.4 kg
Packaging Info
Package Weight
4.085 lb
Box Dimensions (LxWxH)
10.6 x 10.2 x 4.5″

In The Box

  • Focusrite Clarett+ 2Pre Desktop 10×4 USB Type-C Audio/MIDI Interface
  • USB Type-C Cable
  • USB Type-C to USB Type-A Cable
  • External Power Supply
  • Brainworx bx_console Focusrite SC Plug-In (Download)
  • Focusrite Red 2 and Red 3 Plug-Ins (Download)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Focusrite Clarett+ 2Pre – 10×4 USB Type-C Bus-Powered Audio Interface for Music Production”

There are no reviews yet.

Focusrite Clarett+ 2Pre - 10x4 USB Type-C Bus-Powered Audio Interface for Music Production
Focusrite Clarett+ 2Pre - 10x4 USB Type-C Bus-Powered Audio Interface for Music Production
 165,000
Add to cart